[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] osd i/f idea (Mike)

From: Michele Santucci
Subject: Re: [Paparazzi-devel] osd i/f idea (Mike)
Date: Fri, 4 Sep 2009 21:41:15 +0200


no not at all as I was saying previously about the idea of Cèdric the airborne OSD
solution is the one preferable (IMHO).
If you wish to step further in this direction there are several OSD integrated circuits that you can use to semplify the overall circuitry and to semplify the microcontroller programming. For a similar task I developed a solution using a psoc microcontroller and an old SGS IC. This's limited to overlay text information (along with some symbols like
those of VHS VCR players) if you whish further infos I'm available.

Best Regards,

From: "chris" <address@hidden>
Sent: Friday, September 04, 2009 8:29 PM
To: <address@hidden>
Subject: [Paparazzi-devel] osd i/f idea (Mike)

Hi Mike
No i mean airborne.
What i was thinking is that since my osd (also has pitot, air pressure
sensors rpm sensors, fuel sensors etc. ) has a GPS input for displaying
gps data, i can use a microcontroller that will listen
to the airborne serial modem  (much like the Uart tunnel firmware) and
present the data to the osd simulating a gps.
You see any problem in this approach?
I am asking because if there is a problem in my way of thinking i don't
want to
waste any time on this as it is only an idea i have and i haven't
actually started working on it

Paparazzi-devel mailing list

Nessun virus nel messaggio in arrivo.
Controllato da AVG -
Versione: 8.5.409 / Database dei virus: 270.13.76/2345 - Data di rilascio: 09/04/09 05:51:00

reply via email to

[Prev in Thread] Current Thread [Next in Thread]