[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Executing Error

From: Mohit Mundhra
Subject: Re: [Paparazzi-devel] Executing Error
Date: Mon, 24 May 2010 07:43:01 +0530

The problem I think could be that the PPZ board is unable to either lock the position or is unable to communicate it to the GCS. See if you are getting other messages in the message window. Also, check if there is GPS lock (in the messages window check for lat and lon).

Mohit Mundhra

On Mon, May 24, 2010 at 7:35 AM, Reegan M <address@hidden> wrote:
Thanks Felix!

That was the problem... I get to looking at the code for too long and miss the little things.  I appreciate you directing me back to where I should be.

I am still running into the georef problem, does anybody else have any ideas what is causing this problem?

Thanks again,

On Sun, May 23, 2010 at 5:51 PM, Felix Ruess <address@hidden> wrote:
Hi Race,

regarding the airframe.dtd error: You need to specify the correct path
to the DTD ( /conf/airframes/airframe.dtd ) in your airframe file.
That is the first line in the xml file, e.g. :
<!DOCTYPE airframe SYSTEM "airframe.dtd"> or <!DOCTYPE airframe SYSTEM
"../airframe.dtd"> if you have your airframe file in a subfolder of

Not sure about the georef error.

Cheers, Felix

On Mon, May 24, 2010 at 12:04 AM, Reegan M <address@hidden> wrote:
> Hello, everyone!
> I have run into a few more difficulties trying to get paparazzi up and
> running.  I have successfully got the board flashed and ready to execute.
> When I try to execute the operation this is what results:
> /home/reegan/paparazzi3/var/MJ5/ap/ap.elf  :
> section             size         addr
> .text             103018        16384
> .ctorsRun '/home/reegan/paparazzi3/sw/ground_segment/tmtc/link  -d
> /dev/ttyUSB0'
> Run '/home/reegan/paparazzi3/sw/ground_segment/tmtc/server '
> Run '/home/reegan/paparazzi3/sw/ground_segment/cockpit/gcs '
> Fatal error: exception Failure("File not found:
> /home/reegan/paparazzi3/conf/airframes/../../airframe.dtd")
> Broadcasting on network, port 2010
> Thread 1 killed on uncaught exception Failure("#of_world : no georef")
> Broadcasting on network, port 2010
> DONE (exec /home/reegan/paparazzi3/sw/ground_segment/cockpit/gcs  2>&1)
> The georef comes up when I try to upload the google tiles.  I am unsure what
> is causing this.  I am running the 1.3 version of Tiny.
> Thanks,
> Race
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden

Paparazzi-devel mailing list

Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]