[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Maxstream 9XTend required hardware clarification

From: Miles Johnson
Subject: Re: [Paparazzi-devel] Maxstream 9XTend required hardware clarification
Date: Wed, 9 Jun 2010 09:53:59 -0500

Hi Adam,

You can get the development kit XT09-DK, which comes with two OEM modules and two RS-232 development boards.  You can also do your second option if you prefer.  I have used the XT09-DK without any trouble. 

One consideration is to make sure you are OK with the antenna connectors/styles that come with the XT09-DK, one MMCX and one RPSMA.  I was able to use the RPSMA style on the ground, and the MMCX on the vehicle.  The MMCX style antenna is connected to the modem with a short, thin, cable -- not rigidly attached -- which can make it more or less difficult to mount depending on your airframe.

On Wed, Jun 9, 2010 at 09:38, Adam Amos <address@hidden> wrote:
Hi All,

Just looking to clarify what hardware I need to use the Maxstream 9XTend
900Mhz modems.

Do I just need two OEM modules (grounds station & on the plane):
Or do I need a OEM module(plane) and a stand-alone modem(ground station):


reply via email to

[Prev in Thread] Current Thread [Next in Thread]