paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Error while compiling after svn update


From: Jesper Kempe
Subject: Re: [Paparazzi-devel] Error while compiling after svn update
Date: Sat, 3 Jul 2010 12:15:02 +0200

Hi
and thanks Felix. That did the trick. Think I am a bit rusty in how this works...

After struggling with getting USB connection to work in my VMware Player I am finally able to build and upload. 
The problems with USB turned out to be the USB cable! 
It works for my cameras and other stuff but it did not work to connect the Twog. After switching to another cable it worked right away!

//Jesper


2010/7/2 Felix Ruess <address@hidden>
Hi,

did you run a make in the paparazzi root dir again as well?
If yes, try a make clean and another make. Then rebuild your aircraft.

Cheers, Felix

On Fri, Jul 2, 2010 at 3:15 PM, Jesper Kempe <address@hidden> wrote:
> Hi all
> Today I restarted my Paparazzi project after about a year break. This time
> with a Twog instead of a Tiny2.11.
> I did a svn update on my old installation and tried to build the same A/C
> that worked when I tried it last time (long time ago...). Now when I build
> it I get the same error as Cédric. I have also added pulse_type to my radio
> xml. That is the only change I have made in the config files.
>
> Anyone who has an idea on what might be wrong?
> Jesper
>
> Log from the build in the center:
>
> Run 'make -C /home/kempe/paparazzi3 -f Makefile.ac AIRCRAFT=MiddleStick
> clean_ac '
> make: Går till katalogen "/home/kempe/paparazzi3"
> MiddleStick
> rm -fr /home/kempe/paparazzi3/var/MiddleStick
> make: Lämnar katalogen "/home/kempe/paparazzi3"
>
> DONE (exec make -C /home/kempe/paparazzi3 -f Makefile.ac
> AIRCRAFT=MiddleStick clean_ac  2>&1)
>
> Run 'make -C /home/kempe/paparazzi3 -f Makefile.ac AIRCRAFT=MiddleStick
> ap.compile '
> make: Går till katalogen "/home/kempe/paparazzi3"
> MiddleStick
> BUILD MiddleStick
> make[1]: Går till katalogen "/home/kempe/paparazzi3"
> BUILD /home/kempe/paparazzi3/var/MiddleStick/airframe.h
> ##################################################
>
>  AIRFRAME MODEL: MiddleStick
>
> ##################################################
> BUILD /home/kempe/paparazzi3/var/MiddleStick/modules.h
> BUILD /home/kempe/paparazzi3/var/MiddleStick/settings.h
> BUILD /home/kempe/paparazzi3/var/MiddleStick/tuning.h
> BUILD /home/kempe/paparazzi3/var/MiddleStick/periodic.h
> make[1]: Lämnar katalogen "/home/kempe/paparazzi3"
> make[1]: Går till katalogen "/home/kempe/paparazzi3"
> BUILD /home/kempe/paparazzi3/var/MiddleStick/radio.h
> ##################################################
>
>  RADIO MODEL: Futaba_FP-T6NLK
>
> ##################################################
> make[1]: *** Ingen regel för att skapa målet
> "/home/kempe/paparazzi3/sw/tools/gen_conf_radio_control_ppm.out", som behövs
> till "/home/kempe/paparazzi3/var/MiddleStick/conf_radio_control_ppm.h".
> Stannar.
> make[1]: Lämnar katalogen "/home/kempe/paparazzi3"
> make: *** [ac_h] Fel 2
> make: Lämnar katalogen "/home/kempe/paparazzi3"
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>

_______________________________________________
Paparazzi-devel mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel


reply via email to

[Prev in Thread] Current Thread [Next in Thread]