[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Paparazzi-devel] GPS flashing
From: |
Maik Höpfel |
Subject: |
Re: [Paparazzi-devel] GPS flashing |
Date: |
Fri, 9 Jul 2010 10:53:45 +0200 |
Autopilot on is enough. The tunnel does what the name implies, it just
transparently passes any incoming messages to the GPS. Just in case
your Xbees give you more trouble, I think you can also program it via
USB cable just as you do for flashing, read up on the wiki for that.
- Maik
2010/7/9 Roman Nikitin <address@hidden>:
> Felix,
>
> I don´t have any FTDI cable. So you mean I need to download a tunnel first,
> and then it works through the xbees. Is it correct? And while I am doing
> this, as I can see, the GCS should be running. Or not? Or it is enough if the
> autopilot is powered only and xbees connected?
>
> Thank you.
>
> Roman
>
>
> Nachricht-----
> Von: address@hidden [mailto:address@hidden Im Auftrag von Felix Ruess
> Gesendet: Donnerstag, 8. Juli 2010 22:08
> An: address@hidden
> Betreff: Re: [Paparazzi-devel] GPS flashing
>
> If you have an FTDI cable you can also just directly connect the GPS,
> you don't need to go through the autopilot. But using the tunnel can
> be very convenient since you can also just use your already connected
> xbees instead of the serial cable.
>
> Felix
>
> 2010/7/8 C.KUO <address@hidden>:
>> Hi
>>
>>
>> I assume you use Tiny V2 or TWOG, first you need upload "tunnel" to your
>> board though usb (in the paparazzi center, select the new target, and press
>> build then upload)
>>
>> Then connect your FTDI cable to serial port on the Tiny (where the modem is
>> connect to), then you can start us Ublox software to flash your GPS.
>>
>>
>> I hope these helps
>>
>>
>> Regards
>>
>> Chen
>>
>>
>> 引述 Roman Nikitin <address@hidden>:
>>
>>> Hi,
>>>
>>>
>>>
>>> to flash the GPS, can I use the serial connection or it should be done on
>>> the same way I flashed my ap board?
>>>
>>>
>>>
>>> Sorry guys, a lot of questions from my side today. I am really in hurry.
>>>
>>>
>>>
>>> Thanks.
>>>
>>>
>>>
>>> Roman
>>>
>>>
>>>
>>>
>>>
>>> Bristol Institute of Technology
>>>
>>> University of the West of England
>>>
>>> Aerospace Systems Engineering
>>>
>>> email: address@hidden
>>>
>>> Mob.: +44 (0) 7760806643
>>>
>>>
>>>
>>>
>>
>>
>>
>> C.KUO
>> Aerospace Engineering, MEng
>> Mechanical Engineering, PhD
>> Research Associate
>> Department of Materials Science and Engineering
>> Saarland University
>> Campus Dudweiler
>> Am Markt - Zeile 4
>> 66125 Saarbrucken, Germany
>> Tel.: +49 (0) 681 - 302 64197
>> Fax: +49 (0) 681 - 9302 5934
>>
>>
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden
>> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>