[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Paparazzi-devel] No USB device error

From: akochevar
Subject: RE: [Paparazzi-devel] No USB device error
Date: Mon, 26 Jul 2010 14:58:59 -0700
User-agent: Web-Based Email 5.2.23

The booz board cannot be powered through 5V.  The actual power pin is not routed to the board, its simply routed to detect the presence at power on.  You must power the board from another source.  The best source would be from the + and - pads on the board.  Anythign right around 12V would be great.

-------- Original Message --------
Subject: [Paparazzi-devel] No USB device error
From: Marko Thaler <address@hidden>
Date: Mon, July 26, 2010 1:23 pm
To: address@hidden

Hello everybody,

I am testing a newly assembled Booz main board. Loading the USB Boot Loader went smoothly.

However, when I try to program it through USB, I get a no USB device error. USB access rights and device rules are OK. Dmesg and lsusb do not detect the board.

I have tested all the mini-USB connections on the board and everything is fine. The board input voltage through USB is 5V (USB_VBUS), however USB_VBUS_3V3 line (P0.23 pin) has 0V - the voltage drop on R9 is 5V!

Any suggestions what to try next?

Thank you for your help.

Kind regards,


Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]