paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] I get a blank GCS when executing airframe


From: Felix Ruess
Subject: Re: [Paparazzi-devel] I get a blank GCS when executing airframe
Date: Sat, 7 Aug 2010 13:10:35 +0200

Hi Eddie,

the GCS stays blank until you get telemetry messages.
So first you need to get your telemetry working. Check your cables,
settings and baudrates on the xbees as well as in the airframe file.
Also make sure you have the paparazzi udev rules copied and your
ground modem is recognized by your PC.

Cheers, Felix

On Sat, Aug 7, 2010 at 7:44 AM, Edixon Giraldo <address@hidden> wrote:
> Hi, I have not been able to execute my airframe on the GCS.  I have been
> able to download the program to the TWOG and everything seems fine, but,
> when I connect the FTDI cable, build, and execute my A/C, the GCS is just
> blank.  Just the black screen with no telemetry on it.  I have not been able
> to use U-center either to configure my GPS or at least to verify is working
> and receiving a signal.  Can someone please help?
>
> Thanks.
>
> Eddie.
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>



reply via email to

[Prev in Thread] Current Thread [Next in Thread]