Re: [Paparazzi-devel] Xbee pro modules won't communicate

[Felix Ruess]

Hi,

the configuration (coordinator needed or not) you need depends on
which version exactly you have.

Basically two different hardware/software stacks:
Digi XBee Pro 802.15.4 and Digi XBee Pro ZB

See http://paparazzi.enac.fr/wiki/Modems for that also

Cheers, Felix

On Mon, Aug 9, 2010 at 4:43 PM, maq <address@hidden> wrote:
> Did you already check out this guide? I used it successfully a few weeks
> ago.
>
> http://pixhawk.ethz.ch/tutorials/how_to_configure_xbee
>
>
> Am 09.08.2010 um 16:28 schrieb Edixon Giraldo:
>
>> Hi, I have been working with this for hours and cannot make the xbee
>> modules to communicate with each other. I am very new at this, therefore, I
>> am not very familiar on bow to set them up to make one the coordinator and
>> the other one the server. Any ideas on how to do this in XTCU? I did find
>> some instructions on how to do this, but, it was not clear to me. It seems
>> that you have to type some commands on a terminal. I have also been trying
>> to run range tests and all, but, it is not successful.
>> Any help will be greatly appreciated.
>>
>> Thanks.
>>
>> Eddie.
>>
>> Sent from my iPhone
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden
>> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>