Re: [Paparazzi-devel] Xbee pro modules won't communicate

[Edixon Giraldo]

I have the xbee pro 802.15.4

Sent from my iPhone

On Aug 9, 2010, at 9:59 AM, Felix Ruess <address@hidden> wrote:

> Hi,
> 
> the configuration (coordinator needed or not) you need depends on
> which version exactly you have.
> 
> Basically two different hardware/software stacks:
> Digi XBee Pro 802.15.4 and Digi XBee Pro ZB
> 
> See http://paparazzi.enac.fr/wiki/Modems for that also
> 
> Cheers, Felix
> 
> On Mon, Aug 9, 2010 at 4:43 PM, maq <address@hidden> wrote:
>> Did you already check out this guide? I used it successfully a few weeks
>> ago.
>> 
>> http://pixhawk.ethz.ch/tutorials/how_to_configure_xbee
>> 
>> 
>> Am 09.08.2010 um 16:28 schrieb Edixon Giraldo:
>> 
>>> Hi, I have been working with this for hours and cannot make the xbee
>>> modules to communicate with each other. I am very new at this, therefore, I
>>> am not very familiar on bow to set them up to make one the coordinator and
>>> the other one the server. Any ideas on how to do this in XTCU? I did find
>>> some instructions on how to do this, but, it was not clear to me. It seems
>>> that you have to type some commands on a terminal. I have also been trying
>>> to run range tests and all, but, it is not successful.
>>> Any help will be greatly appreciated.
>>> 
>>> Thanks.
>>> 
>>> Eddie.
>>> 
>>> Sent from my iPhone
>>> _______________________________________________
>>> Paparazzi-devel mailing list
>>> address@hidden
>>> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>> 
>> 
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden
>> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>> 
> 
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>