paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Xbee pro modules won't communicate


From: Edixon Giraldo
Subject: Re: [Paparazzi-devel] Xbee pro modules won't communicate
Date: Mon, 9 Aug 2010 10:37:31 -0500

No, I have not touched the firmware. I have no idea what is wrong then. Thanks.

Sent from my iPhone

On Aug 9, 2010, at 10:29 AM, Felix Ruess <address@hidden> wrote:

> then it should work out of the box... no coordinator needed.
> unless you already flashed a different firmware.
> 
> On Mon, Aug 9, 2010 at 5:11 PM, Edixon Giraldo <address@hidden> wrote:
>> I have the xbee pro 802.15.4
>> 
>> Sent from my iPhone
>> 
>> On Aug 9, 2010, at 9:59 AM, Felix Ruess <address@hidden> wrote:
>> 
>>> Hi,
>>> 
>>> the configuration (coordinator needed or not) you need depends on
>>> which version exactly you have.
>>> 
>>> Basically two different hardware/software stacks:
>>> Digi XBee Pro 802.15.4 and Digi XBee Pro ZB
>>> 
>>> See http://paparazzi.enac.fr/wiki/Modems for that also
>>> 
>>> Cheers, Felix
>>> 
>>> On Mon, Aug 9, 2010 at 4:43 PM, maq <address@hidden> wrote:
>>>> Did you already check out this guide? I used it successfully a few weeks
>>>> ago.
>>>> 
>>>> http://pixhawk.ethz.ch/tutorials/how_to_configure_xbee
>>>> 
>>>> 
>>>> Am 09.08.2010 um 16:28 schrieb Edixon Giraldo:
>>>> 
>>>>> Hi, I have been working with this for hours and cannot make the xbee
>>>>> modules to communicate with each other. I am very new at this, therefore, 
>>>>> I
>>>>> am not very familiar on bow to set them up to make one the coordinator and
>>>>> the other one the server. Any ideas on how to do this in XTCU? I did find
>>>>> some instructions on how to do this, but, it was not clear to me. It seems
>>>>> that you have to type some commands on a terminal. I have also been trying
>>>>> to run range tests and all, but, it is not successful.
>>>>> Any help will be greatly appreciated.
>>>>> 
>>>>> Thanks.
>>>>> 
>>>>> Eddie.
>>>>> 
>>>>> Sent from my iPhone
>>>>> _______________________________________________
>>>>> Paparazzi-devel mailing list
>>>>> address@hidden
>>>>> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>>> 
>>>> 
>>>> _______________________________________________
>>>> Paparazzi-devel mailing list
>>>> address@hidden
>>>> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>>> 
>>> 
>>> _______________________________________________
>>> Paparazzi-devel mailing list
>>> address@hidden
>>> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>> 
>> 
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden
>> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>> 
> 
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> 



reply via email to

[Prev in Thread] Current Thread [Next in Thread]