RE: [Paparazzi-devel] Calibrating PFD to match aircraft **SOLVED**

[Edixon Giraldo]

That is correct.  I had one of the servos reversed.  Once I changed the direction by switching the min-max, it was moving in the correct direction.
 
Thanks.
 
Eddie.
 
> Date: Mon, 16 Aug 2010 13:20:31 +0200
> From: address@hidden
> Subject: RE: [Paparazzi-devel] Calibrating PFD to match aircraft
> To: address@hidden
>
> hi Eddi,
>
> you probably mixed up the direction of your rc transmitter and corrected it with a reversed servo setting....
>
> if this is the problem just make sure you have setup the direction of all servos correct for Auto1.  you can find those in the airframe.xml be sure all servos move in the right direction when you have your fingers on the thermopiles in auto1
> so for the aileron your plane should start a right turn when you have your fingers on the left thermopile in flight direction
> for the elevator it should pull or try to climb if you have your finger in front of your airplane
>
> if this is working start to setup your receiver  in the radio.xml so all servos are going in the right direction in manual mode
>
> and you are done
>
> ps you can reverse directions by changing the max and min values
>
> have fun Tobi
> ___________________________________________________________
> GRATIS für alle WEB.DE Nutzer: Die maxdome Movie-FLAT!
> Jetzt freischalten unter http://movieflat.web.de
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel