Re: [Paparazzi-devel] Missing Makefile.arm7 ?

[Eric Parsonage]

it would be cool to allow includes in conf.xml


On 08/10/2010, at 1:14 AM, Felix Ruess wrote:

> Hi David,
> 
> the default airframes should be up to date. They are in
> conf.xml.example. But they only get copied to conf.xml if you don't
> already have one. Meaning it will work if you just made a new checkout
> and hence don't have your own conf.xml with old airframes.
> 
> So you should update your conf.xml and through out the old ones and
> replace them with the up-to-date examples. Or just delete your
> conf.xml, let it be created again and then add your own airframes
> again...
> 
> Maybe we could change it so that the conf.xml.example is included
> automatically and you only put your own airframes in conf.xml which is
> not under version control. Then the examples would always be up to
> date.
> 
> Cheers, Felix
> 
> On Thu, Oct 7, 2010 at 4:32 PM, David Conger <address@hidden> wrote:
>> Hello,
>> 
>> This is interesting. I was using the commands I always use and that are on 
>> the WIki for programming the u-blox using the tunnel. I run make at the 
>> command line but used the MJ5 airframe which is one of the default ones. I 
>> guess the fault is in the MJ5 airframe file?
>> 
>> It would be nice to have a default airframe files and custom airframe files. 
>> The defaults always being updated when the code changes. Although I'm not 
>> new and will make the changes required for someone new we should make an 
>> experience where following the commands on the Wiki or choosing defaults in 
>> the menu just work. I suppose it means when changes like this are made 
>> someone also changes the defaults as well.  With so many airframe files now 
>> that's not practical hence my suggestion to limit or separate them into 
>> default and custom or other or ?
>> 
>> Thank you Felix for helping. I will make the changes. To quickly solve my 
>> issue I just reverted SVN using: svn update -r 5920
>> 
>> -David
>> On Oct 7, 2010, at 3:58 AM, Felix Ruess wrote:
>> 
>>> Hi David,
>>> 
>>> the Makefile.arm7 is obsolete, we now have the more consistent
>>> Makefile.lpc21 for the tiny.
>>> 
>>> are you still using the old makefile section or did you switch to the
>>> new firmware/subsystems already?
>>> That sounds like you still use the old way and then you would have to
>>> adapt your makefile section.
>>> 
>>> If you use firmware/subsystems you should have something like this in
>>> your airframe file:
>>> 
>>>  <firmware name="setup">
>>>    <target name="tunnel"   board="tiny_2.11"/>
>>>  </firmware>
>>> 
>>> When you set the board it will automatically call the right Makefile
>>> for that architecture.
>>> (In this case $(TARGET).ARCHDIR is set to lpc21 in the
>>> tiny_2.11.makefile and then the correct Makefile.lpc21 will be called)
>>> 
>>> Cheers, Felix
>>> 
>>> On Thu, Oct 7, 2010 at 6:30 AM, David Conger <address@hidden> wrote:
>>>> I tried to program the tunnel into a Tiny2.11 tonight and get:
>>>> make[1]: Entering directory `/home/dconger/paparazzi3/sw/airborne'
>>>> Makefile:38: ../../conf/Makefile.arm7: No such file or direct
>>>> 
>>>> Sure enough the file isn't found anywhere. I did see it in a backup SVN 
>>>> and a change 2 weeks ago from flixr saying "moved arm7 directory to 
>>>> arch/lpc21 and set most makefiles accordingly" ...
>>>> 
>>>> Do I need to fix a Makefile somewhere?
>>>> 
>>>> -David
>>>> 
>>>> _______________________________________________
>>>> Paparazzi-devel mailing list
>>>> address@hidden
>>>> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>>> 
>>> 
>>> _______________________________________________
>>> Paparazzi-devel mailing list
>>> address@hidden
>>> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>> 
>> 
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden
>> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>> 
> 
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel