paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Getting Started - No USB device


From: Manikandtan C. K.
Subject: Re: [Paparazzi-devel] Getting Started - No USB device
Date: Tue, 4 Jan 2011 17:33:04 +0530

1. sudo ./paparazzi works. no Issues.

2. dmesg | tail -5 gives the following o/p:

address@hidden:~/paparazzi$ dmesg |tail -5
[  175.880021] usb 2-5: new full speed USB device using ohci_hcd and address 5
[  176.288018] usb 2-5: device not accepting address 5, error -62
[  176.464021] usb 2-5: new full speed USB device using ohci_hcd and address 6
[  176.872018] usb 2-5: device not accepting address 6, error -62
[  176.872031] hub 2-0:1.0: unable to enumerate USB device on port 5

Is this right? especially the 5th line.

3. I am a user in the plugdev and copied the rules to udev (confirmed visually)

 tried running following code at terminal:
make AIRCRAFT= MIcrojet clean_ac ap.upload

gives the same o/p as before:


no USB device
make[1]: *** [upload] Error 1
make: *** [ap.upload] Error 2




reply via email to

[Prev in Thread] Current Thread [Next in Thread]