Re: [Paparazzi-devel] Paparazzi on Mac OSX

[Bernard Davison]

Hi Stephen,

I should change the instructions to say edit ~/.profile as that is better.
I'll get to programming over the weekend. Just don't know yet if what was 
compiled actually works.

Once we have the process a little more sorted and robust we'll link the MacOSX 
install page on the Installation page to let people know about it.

Cheers,
Bernie.

On 14/01/2011, at 11:20 AM, Stephen Dwyer wrote:

> Hello,
> 
> I also discovered the wiki page describing the OSX installation. I
> just wanted to report I was successfully able to install using both
> the slightly older 18 step process as well as the new 10 step process.
> The only hiccup was during the 18 step process, as I needed to get the
> wget macport. Both have resulted in successfully running Paparazzi
> Center, though I have yet to compile an airframe for simulation or
> otherwise (I have only run it a couple of times prior, still learning
> about everything). I wanted to note I modified my ~/.profile file
> instead of the /etc/profile one, but I am not sure if this was ok.
> Thanks for working on this!
> 
> Thanks,
> -Stephen
> 
> On Thu, Jan 13, 2011 at 4:05 PM, David Conger <address@hidden> wrote:
>> Hi Eric,
>> Good catch. It has been a very long time since I updated. Doing it now...
>> -David
>> On Jan 13, 2011, at 12:09 AM, Eric Parsonage wrote:
>> 
>> David,
>> the xml-light library seems to be missing for you. When was the last time
>> you updated your ports I had the maintainer do a modification to that port?
>> and did you install the xml-light port ?
>> Eric
>> 
>> 
>> 
>> On 13/01/2011, at 5:01 PM, David Conger wrote:
>> 
>> Hello,
>> I know I'm being impatient but maybe I can help test this.
>> I'm following the steps on this
>> page: http://paparazzi.enac.fr/wiki/InstallationMacOSX
>> First issue:
>> mac-3:~ bmw330i$ sudo port install git-core
>> Password:
>> Sorry, try again.
>> Password:
>> --->  Computing dependencies for git-core
>> --->  Verifying checksum(s) for curl-ca-bundle
>> Error: Checksum (md5) mismatch for certdata-1.62.txt
>> Error: Checksum (sha1) mismatch for certdata-1.62.txt
>> Error: Checksum (rmd160) mismatch for certdata-1.62.txt
>> Error: Target org.macports.checksum returned: Unable to verify file
>> checksums
>> Error: The following dependencies failed to build: curl curl-ca-bundle
>> p5-error rsync
>> Error: Status 1 encountered during processing.
>> Before reporting a bug, first run the command again with the -d flag to get
>> complete output.
>> Second:
>> All is good until I do the make:
>> mac-3:paparazzi bmw330i$ make
>> cd sw/supervision; make
>> ocamldep -I ../lib/ocaml *.ml* > .depend
>> grep -v invisible_char paparazzicenter.glade > /tmp/paparazzicenter.glade
>> lablgladecc2 -hide-default -root window /tmp/paparazzicenter.glade >
>> gtk_pc.ml
>> ocamlfind: Package `xml-light' not found
>> OC gtk_pc.ml
>> grep -v invisible_char paparazzicenter.glade > /tmp/paparazzicenter.glade
>> lablgladecc2 -hide-default -root hbox_program /tmp/paparazzicenter.glade |
>> grep -B 1000000 "  end" > gtk_process.ml
>> ocamlfind: Package `xml-light' not found
>> OC gtk_process.ml
>> ocamlfind: Package `xml-light' not found
>> OC ../lib/ocaml/extXml.mli
>> ocamlfind: Package `xml-light' not found
>> OC ../lib/ocaml/env.mli
>> ocamlfind: Package `xml-light' not found
>> OC pc_common.ml
>> ocamlfind: Package `xml-light' not found
>> OC ../lib/ocaml/gtk_tools.mli
>> ocamlfind: Package `xml-light' not found
>> OC pc_aircraft.ml
>> ocamlfind: Package `xml-light' not found
>> OC pc_control_panel.ml
>> ocamlfind: Package `xml-light' not found
>> OC paparazzicenter.ml
>> make[1]: *** No rule to make target `../lib/ocaml/lib-pprz.cma', needed by
>> `paparazzicenter'.  Stop.
>> make: *** [center] Error 2
>> I'm a bit of a do it once and then understand person. Steps 12, 14, 15 are
>> confusing as pseudo variables are used that are not well explained. like "cd
>> <GIT>/paparazzi" ... where is <GIT> defined? Now where I used git to clone
>> to is my home so I took a guess you meant: ${HOME}/paparazzi
>> Is there any hope of correcting the above? I've tried doing "locate
>> xml-light"
>> (/opt/local/var/macports/software/xml-light/2.2_0/opt/local/lib/ocaml) and
>> adding that to DYLD_LIBRARY_PATH but it's not working. Just seem to need to
>> know how to get ocamlfile to see the xml-light package or if it's not
>> installed how to check.
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden
>> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>> 
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden
>> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>> 
>> 
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden
>> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>> 
>> 
> 
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel

smime.p7s
Description: S/MIME cryptographic signature