paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: AW: [Paparazzi-devel] Reply to:"IR Sensor from FMA Direct (Roman Nik


From: Prashanth Thankachan
Subject: Re: AW: [Paparazzi-devel] Reply to:"IR Sensor from FMA Direct (Roman Nikitin)"
Date: Mon, 24 Jan 2011 15:57:33 +0530

You may have to modify them for use with paparazzi especially if you plan to run the FMA sensors with 3.3volts as the gains can be too high at 3.3 volts

On Mon, Jan 24, 2011 at 2:55 PM, Roman Nikitin <address@hidden> wrote:
Very good advise.

Thanks Gareth

-----Ursprüngliche Nachricht-----
Von: paparazzi-devel-bounces+roman.nikitin=web.de@nongnu.org [mailto:paparazzi-devel-bounces+roman.nikitin=web.de@nongnu.org] Im Auftrag von Gareth Roberts
Gesendet: Sonntag, 23. Januar 2011 21:12
Betreff: Re: AW: [Paparazzi-devel] Reply to:"IR Sensor from FMA Direct (Roman Nikitin)"

If you peel off the plastic label on the top with a scalpel (the one that
says ALIGN THIS WAY or whatever), there is a phillips screw in the middle.
You can trace the circuit very easily, the ground plane is fairly large
and the positive goes to both op-amps.
If you are careful, once you've done it you can superglue the label back
on again after if you need to keep the unit pristine.

Sorry I can't remember any more about the order of the wiring!

Cheers,
--G

On Sun, 23 Jan 2011 11:22:07 -0000, Roman Nikitin <address@hidden>
wrote:

> Thanks Chris,
>
> It is exactly what I was looking for.
>
> Roman
>
> -----Ursprüngliche Nachricht-----
> Von: paparazzi-devel-bounces+roman.nikitin=web.de@nongnu.org
> [mailto:paparazzi-devel-bounces+roman.nikitin=web.de@nongnu.org] Im
> Auftrag
> von Chris
> Gesendet: Sonntag, 23. Januar 2011 11:06
> An: address@hidden
> Betreff: [Paparazzi-devel] Reply to:"IR Sensor from FMA Direct (Roman
> Nikitin)"
>
> You mean this?
> http://paparazzi.enac.fr/wiki/Other_Infrared_Sensors
> I never bought them from Europe but if you cannot find them try here:
> http://www.watterott.com/de/Co-Pilot-Sensor-Modul?x8c9fa=kgkgbscf8rtpumooohm
> 7ol6iu3
> I use them for both XY and Z sensors
> Chris
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel


_______________________________________________
Paparazzi-devel mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel



--
__________________________________________
Prashanth T, PhD
St John's Research Institute
St John's National Academy of Health Sciences,
Sarjapur Road, Bangalore 560034, India
 
Phone: +91-80-25532037, 22065059, Ext 236
Fax: +91-80-25501088, 25532037 Ext 103
_______________________________________________________
 

reply via email to

[Prev in Thread] Current Thread [Next in Thread]