[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] temperature measurement -experiment

From: Felix Ruess
Subject: Re: [Paparazzi-devel] temperature measurement -experiment
Date: Tue, 3 May 2011 13:49:54 +0200

Hi Prashanth,

there are already quite a few modules for temperature and other meteo
sensors, see
You can also use ADC generic, to read one or two extra ADC ports and
automatically send a message down to the ground station:

Cheers, Felix

On Fri, Apr 15, 2011 at 11:20 AM, Prashanth Thankachan
<address@hidden> wrote:
> Dear All
> I have been flying paparazzi for quite some time now and decided to do some
> simple experiments with it just to learn and understand the system better.
> I would want to measure the temperature of the air at various altitudes
> using a simple thermometer such as LM35 and connect it to one of the
> existing ADC and have the data sent from the plane down via the Ivy bus and
> have it plotted on the ground against altitude.
> I am sure this is possible, or many have you may have done things more
> advanced than this. Could please guide me to an example of the modification
> required to the airframe file or the activation of the ADC module and
> changes required on the telemetry section to achieve this capability.
> Best Regards
> Prashanth
> --
> __________________________________________
> Prashanth T, PhD
> St John's Research Institute
> St John's National Academy of Health Sciences,
> Sarjapur Road, Bangalore 560034, India
> Phone: +91-80-25532037, 22065059, Ext 236
> Fax: +91-80-25501088, 25532037 Ext 103
> _______________________________________________________
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden

reply via email to

[Prev in Thread] Current Thread [Next in Thread]