[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Problem in the CGS

From: Leandro Chelini
Subject: Re: [Paparazzi-devel] Problem in the CGS
Date: Sun, 15 May 2011 14:47:11 +0200
User-agent: Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; de; rv: Gecko/20110414 Lightning/1.0b2 Thunderbird/3.1.10

Try the Microjet Example from the list. It shoud be possible to build and run the simulation. If this is running you have a problem with your Airframe.
You should see outputs like
CC /home/pedro/paparazzi/var/LISA_ASCTEC_PIOTR/sim/....o
if you build the simulation.
Otherwise I don't know, where the "bug" can be.


Am 14.05.11 03:27, schrieb Pedro Andrade:
Dear Leandro,

I'm new in UAVs and I installed now the PAPARAZZI.  
I built the simulation and the LISA_ASCTEC_PIOTR folder, was created. However the folder "sim" has just other the folder named home and then :


But the error to continued :
Error: '/home/pedro/paparazzi/var/LISA_ASCTEC_PIOTR/sim/simsitl' is missing. Build target sim for A/C LISA_ASCTEC_PIOTR ?


Date: Fri, 13 May 2011 21:42:48 +0200
From: address@hidden
To: address@hidden
Subject: Re: [Paparazzi-devel] Problem in the CGS

1. GCS (Ground Control Station) ;-)
2. Excuse me for that question but have you built the simulation before?
3. take a look at the var folder. Is there a folder named like your Session?
4. Does the builder exit with no error?


Am 13.05.11 16:59, schrieb pedro andrade:
Hi world,

I've a small problem with CGS, one the pictures is the CGS and the other is the error in the PAPARAZZI CENTER.
note: There not, the navigation instruments in CGS.


_______________________________________________ Paparazzi-devel mailing list address@hidden

_______________________________________________ Paparazzi-devel mailing list address@hidden
_______________________________________________ Paparazzi-devel mailing list address@hidden

reply via email to

[Prev in Thread] Current Thread [Next in Thread]