[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] GPS led?

From: Felix Ruess
Subject: Re: [Paparazzi-devel] GPS led?
Date: Thu, 26 May 2011 14:55:24 +0200

Hi Chris,

if no GPS is connected the led should be off. If you get messages from
the gps, but don't have a 3d fix yet it will blink and it will stay on
if you have a 3d fix.
I didn't quite understand if the behavior you are seeing is the same...

Cheers, Felix

On Thu, May 26, 2011 at 2:36 PM, Chris <address@hidden> wrote:
> Hi.
> Lately i acquired some gps problems so after some troubleshooting i think
> the gps is damaged
> probably to high G's .
> Anyway i did noticed that the gps led (2) does not blink only after the gps
> gets a 3d fix but it blinks all the time after power on.
> It does not blink if i disconnect the gps.
> Is this normal with the latest code?
> Chris
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden

reply via email to

[Prev in Thread] Current Thread [Next in Thread]