[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Paparazzi-devel] Question regarding servo motor
From: |
Steffen Spies |
Subject: |
Re: [Paparazzi-devel] Question regarding servo motor |
Date: |
Wed, 13 Jul 2011 07:18:18 +0200 |
Hi Dee,
that is a BIG surprise to me.
Yesterday evening I made the same experience while I did some testing: one of
my servos (Multiplex Tiny S) burned out!
And I also noticed big jitter even in manual mode sometimes and disappears when
you move the sticks - but will return.
I use a Tiny V2.11
Steffen
Am 13.07.2011 06:54, schrieb Long Di:
> Hello all,
> I have started using the new paparazzi distribution for fixed-wing.
> Everything works fine for my implementation except the servo motors. Both of
> my servos jitter even under manual mode, and the right servo got burned out
> today after a long testing.
> The strange thing is that when I moved the joystick handle, sometimes
> the jitter just disappeared, then it came back again. I tried to seal my
> servo with copper tape and added a glitch buster, didn't help. I also tried
> to play with the servo parameters (min, neutral, max), didn't get solved
> either.
> I also noticed the old PPM_FILTERING code doesn't exist any more,
> wondering whether that should help.
> I am using Hitec MG-82 servos. Anyone has had similar problems? Any
> inputs are appreciated.
>
> Dee
--
NEU: FreePhone - kostenlos mobil telefonieren!
Jetzt informieren: http://www.gmx.net/de/go/freephone
Re: [Paparazzi-devel] Question regarding servo motor, Long Di, 2011/07/13