paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] What setting I should to use?


From: Felix Ruess
Subject: Re: [Paparazzi-devel] What setting I should to use?
Date: Mon, 15 Aug 2011 18:55:04 +0200

Blake,
what I wrote still applies to imu_health and renorm_sqrt_count as
well, these are just used in the ahrs_dcm subsystem.
There are only ins_roll_neutral and ins_pitch_neutral in the ins
section of your settings file if you are using a current version.

So this settings file is for fixedwing firmware with an IMU. What
imu/ahrs/ins subsystem or module are you using?

Cheers, Felix

On Mon, Aug 15, 2011 at 6:42 PM, Blake Chambers <address@hidden> wrote:
> Felix,
> Actually, it is not just the imu_overrun setting.  I am using the
> tuning_ins.xml, and everything in the ins section is causing the "not
> declared" error.
> Respectfully,
> Blake J. W. Chambers
> MIT '13 Aero/Astro Department
> Phi Kappa Theta
> Phone: (617) 819-4021
>
>
>
> On Mon, Aug 15, 2011 at 11:55 AM, Felix Ruess <address@hidden> wrote:
>>
>> Hi Blake,
>>
>> if you still get the same error (imu_overrun not declared), you are
>> not using the current tuning_ins.xml settings file from the master
>> branch.
>> Current version of the master branch does not contain this setting:
>>
>> https://github.com/paparazzi/paparazzi/blob/master/conf/settings/tuning_ins.xml
>>
>> So the entries in your settings.xml file(s) basically just let you set
>> parameters, etc. by directly modifying variables (or call handlers).
>> You are getting this error because you settings file still contains
>> imu_overrun, but you don't have an imu subsystem that has that
>> variable.
>>
>> Cheers, Felix
>>
>>
>> On Mon, Aug 15, 2011 at 1:39 AM, Blake Chambers <address@hidden> wrote:
>> > I am still having the same compiling problem.  I am using
>> > tuning_ins.xml; I
>> > have updated the version.
>> > Do you have any other advice that might help?
>> > Respectfully,
>> > Blake J. W. Chambers
>> > MIT '13 Aero/Astro Department
>> > Phi Kappa Theta
>> > Phone: (617) 819-4021
>> >
>> >
>> >
>> > On Fri, Aug 12, 2011 at 8:02 PM, Felix Ruess <address@hidden>
>> > wrote:
>> >>
>> >> You have an outdated version... please update to the latest git master.
>> >>
>> >> On Fri, Aug 12, 2011 at 8:52 PM, Pedro Andrade
>> >> <address@hidden>
>> >> wrote:
>> >> > Hi Felix,
>> >> > I tryed set the " setting" with tunning_ins.xml file, however  the
>> >> > following
>> >> > error happens:
>> >> >
>> >> >
>> >> > ...........................................................................................................................................................................................
>> >> > Run 'make -C /home/lmi/paparazzi -f Makefile.ac AIRCRAFT=AVIAO
>> >> > ap.compile '
>> >> > make: Entrando no diretório `/home/lmi/paparazzi'
>> >> > AVIAO
>> >> > BUILD AVIAO, TARGET ap
>> >> > make[1]: Entrando no diretório `/home/lmi/paparazzi'
>> >> > BUILD /home/lmi/paparazzi/var/AVIAO/generated/airframe.h
>> >> > ##################################################
>> >> >  AIRFRAME MODEL: AVIAO
>> >> > ##################################################
>> >> > BUILD /home/lmi/paparazzi/var/AVIAO/generated/modules.h
>> >> > BUILD /home/lmi/paparazzi/var/AVIAO/generated/settings.h
>> >> > BUILD /home/lmi/paparazzi/var/AVIAO/generated/tuning.h
>> >> > BUILD /home/lmi/paparazzi/var/AVIAO/generated/periodic.h
>> >> > make[1]: Saindo do diretório `/home/lmi/paparazzi'
>> >> > make[1]: Entrando no diretório `/home/lmi/paparazzi'
>> >> > BUILD /home/lmi/paparazzi/var/AVIAO/generated/radio.h
>> >> > ##################################################
>> >> >  RADIO MODEL: cockpitSX (easy)
>> >> > ##################################################
>> >> > make[1]: Saindo do diretório `/home/lmi/paparazzi'
>> >> > make[1]: Entrando no diretório `/home/lmi/paparazzi'
>> >> > BUILD /home/lmi/paparazzi/var/AVIAO/generated/flight_plan.h
>> >> > ##################################################
>> >> >  FLIGHT PLAN: Basic
>> >> > ##################################################
>> >> > Warning: low altitude (0<0+25) in <waypoint NAME="TD" Y="57.0"
>> >> > X="28.8"
>> >> > ALT="0.0"/>
>> >> > BUILD /home/lmi/paparazzi/var/AVIAO/flight_plan.xml
>> >> > make[1]: Saindo do diretório `/home/lmi/paparazzi'
>> >> > cd sw/airborne; make PAPARAZZI_SRC=/home/lmi/paparazzi
>> >> > PAPARAZZI_HOME=/home/lmi/paparazzi TARGET=ap all
>> >> > make[1]: Entrando no diretório `/home/lmi/paparazzi/sw/airborne'
>> >> > DEPEND /home/lmi/paparazzi/var/AVIAO/ap/.depend
>> >> > make[1]: Saindo do diretório `/home/lmi/paparazzi/sw/airborne'
>> >> > make[1]: Entrando no diretório `/home/lmi/paparazzi/sw/airborne'
>> >> > Using CC   = /opt/paparazzi/stm32/bin/arm-none-eabi-gcc
>> >> > Using LD   = /opt/paparazzi/stm32/bin/arm-none-eabi-gcc
>> >> > Using CP   = /opt/paparazzi/stm32/bin/arm-none-eabi-objcopy
>> >> > Using DMP  = /opt/paparazzi/stm32/bin/arm-none-eabi-objdump
>> >> > Using NM   = /opt/paparazzi/stm32/bin/arm-none-eabi-nm
>> >> > Using SIZE = /opt/paparazzi/stm32/bin/arm-none-eabi-size
>> >> > Using OOCD = /opt/paparazzi/stm32/bin/openocd
>> >> > GCC version:
>> >> > arm-none-eabi-gcc (GCC) 4.4.3
>> >> > Copyright (C) 2010 Free Software Foundation, Inc.
>> >> > This is free software; see the source for copying conditions.  There
>> >> > is
>> >> > NO
>> >> > warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR
>> >> > PURPOSE.
>> >> > OOCD version:
>> >> > Open On-Chip Debugger 0.5.0-dev-00789-g59a6380 (2011-03-15-11:50)
>> >> > Licensed under GNU GPL v2
>> >> > For bug reports, read
>> >> > http://openocd.berlios.de/doc/doxygen/bugs.html
>> >> > *** NOT using multilib ***
>> >> > CC /home/lmi/paparazzi/var/AVIAO/ap/mcu.o
>> >> > CC /home/lmi/paparazzi/var/AVIAO/ap/sys_time.o
>> >> > CC /home/lmi/paparazzi/var/AVIAO/ap/actuators.o
>> >> > CC /home/lmi/paparazzi/var/AVIAO/ap/arch/stm32/mcu_arch.o
>> >> > arch/stm32/mcu_arch.c:46:2: warning: #warning Info: Using external
>> >> > clock
>> >> > CC /home/lmi/paparazzi/var/AVIAO/ap/arch/stm32/led_hw.o
>> >> > CC /home/lmi/paparazzi/var/AVIAO/ap/./inter_mcu.o
>> >> > CC /home/lmi/paparazzi/var/AVIAO/ap/math/pprz_geodetic_int.o
>> >> > CC /home/lmi/paparazzi/var/AVIAO/ap/math/pprz_geodetic_float.o
>> >> > CC /home/lmi/paparazzi/var/AVIAO/ap/math/pprz_geodetic_double.o
>> >> > CC /home/lmi/paparazzi/var/AVIAO/ap/math/pprz_trig_int.o
>> >> > CC /home/lmi/paparazzi/var/AVIAO/ap/firmwares/fixedwing/main_fbw.o
>> >> > CC /home/lmi/paparazzi/var/AVIAO/ap/subsystems/electrical.o
>> >> > CC /home/lmi/paparazzi/var/AVIAO/ap/./commands.o
>> >> > CC /home/lmi/paparazzi/var/AVIAO/ap/firmwares/fixedwing/main_ap.o
>> >> > In file included from firmwares/fixedwing/main_ap.c:50:
>> >> > /home/lmi/paparazzi/var/AVIAO/generated/settings.h: In function
>> >> > 'settings_get_value':
>> >> > /home/lmi/paparazzi/var/AVIAO/generated/settings.h:153: error:
>> >> > 'imu_overrun'
>> >> > undeclared (first use in this function)
>> >> > /home/lmi/paparazzi/var/AVIAO/generated/settings.h:153: error: (Each
>> >> > undeclared identifier is reported only once
>> >> > /home/lmi/paparazzi/var/AVIAO/generated/settings.h:153: error: for
>> >> > each
>> >> > function it appears in.)
>> >> > firmwares/fixedwing/main_ap.c: In function 'reporting_task':
>> >> > firmwares/fixedwing/main_ap.c:199: error: 'imu_overrun' undeclared
>> >> > (first
>> >> > use in this function)
>> >> > make[1]: **
>> >> > [/home/lmi/paparazzi/var/AVIAO/ap/firmwares/fixedwing/main_ap.o]
>> >> > Erro 1
>> >> > make[1]: Saindo do diretório `/home/lmi/paparazzi/sw/airborne'
>> >> > make: ** [ap.compile] Erro 2
>> >> > make: Saindo do diretório `/home/lmi/paparazzi'
>> >> > DONE (exec make -C /home/lmi/paparazzi -f Makefile.ac AIRCRAFT=AVIAO
>> >> > ap.compile  2>&1)
>> >> >
>> >> >
>> >> > ................................................................................................................................................................................................................................
>> >> > Cheers
>> >> > Pedro Andrade
>> >> >> Date: Tue, 9 Aug 2011 22:18:15 +0200
>> >> >> From: address@hidden
>> >> >> To: address@hidden
>> >> >> Subject: Re: [Paparazzi-devel] What setting I should to use?
>> >> >>
>> >> >> Please use tuning_ins.xml
>> >> >>
>> >> >> (There never was a tuning_basic_imu.xml, I guess you meant
>> >> >> tuning_basic_ins.xml which is now just tuning_ins.xml without any
>> >> >> ahrs/dcm specific stuff).
>> >> >>
>> >> >> Cheers, Felix
>> >> >>
>> >> >> On Tue, Aug 9, 2011 at 9:57 PM, Christophe De Wagter
>> >> >> <address@hidden>
>> >> >> wrote:
>> >> >> > Oh, I should have mentioned that:
>> >> >> > telemetry: default_fixedwing_imu.xml
>> >> >> > settings: tuning_basic_imu.xml
>> >> >> > (disclaimer: if names have not changed)
>> >> >> > Sincerely
>> >> >> > -Christophe
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> > On Tue, Aug 9, 2011 at 8:06 PM, Pedro Andrade
>> >> >> > <address@hidden>
>> >> >> > wrote:
>> >> >> >>
>> >> >> >> Hi Christophe,
>> >> >> >> can you tell me, what is the telemetry configuration file do you
>> >> >> >> use?
>> >> >> >> (i.e. default, xbee868)
>> >> >> >> Cheers
>> >> >> >> ________________________________
>> >> >> >> Date: Tue, 12 Jul 2011 12:41:20 +0200
>> >> >> >> From: address@hidden
>> >> >> >> To: address@hidden
>> >> >> >> Subject: Re: [Paparazzi-devel] What setting I should to use?
>> >> >> >>
>> >> >> >> make a copy of ./conf/airframes/ppzuav/fixedwing/tiny_ppzuav.xml
>> >> >> >> change to board="lisa_l_1.1"
>> >> >> >> change telemetry to type="xbee_api" and set your baudrate
>> >> >> >> change imu to type="aspirin"
>> >> >> >> -Christophe
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >> On Tue, Jul 12, 2011 at 3:26 AM, Pedro Andrade
>> >> >> >> <address@hidden>
>> >> >> >> wrote:
>> >> >> >>
>> >> >> >> Hi,
>> >> >> >> I'm making a fixedwing.
>> >> >> >> Cheers.
>> >> >> >>
>> >> >> >> ________________________________
>> >> >> >> Date: Wed, 6 Jul 2011 23:12:33 +0200
>> >> >> >> From: address@hidden
>> >> >> >> To: address@hidden
>> >> >> >> Subject: Re: [Paparazzi-devel] What setting I should to use?
>> >> >> >>
>> >> >> >> Are you making a rotorcraft or a fixedwing?
>> >> >> >> On Jul 6, 2011 1:28 AM, "Pedro Andrade"
>> >> >> >> <address@hidden>
>> >> >> >> wrote:
>> >> >> >> >
>> >> >> >> > Hi all,
>> >> >> >> > What setting I should to use for the Lisa/L, Aspirin and XBee
>> >> >> >> > modem.Cheers
>> >> >> >>
>> >> >> >> _______________________________________________ Paparazzi-devel
>> >> >> >> mailing
>> >> >> >> list address@hidden
>> >> >> >> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>> >> >> >> _______________________________________________
>> >> >> >> Paparazzi-devel mailing list
>> >> >> >> address@hidden
>> >> >> >> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >> _______________________________________________ Paparazzi-devel
>> >> >> >> mailing
>> >> >> >> list address@hidden
>> >> >> >> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>> >> >> >> _______________________________________________
>> >> >> >> Paparazzi-devel mailing list
>> >> >> >> address@hidden
>> >> >> >> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>> >> >> >>
>> >> >> >
>> >> >> >
>> >> >> > _______________________________________________
>> >> >> > Paparazzi-devel mailing list
>> >> >> > address@hidden
>> >> >> > https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>> >> >> >
>> >> >> >
>> >> >>
>> >> >> _______________________________________________
>> >> >> Paparazzi-devel mailing list
>> >> >> address@hidden
>> >> >> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>> >> >
>> >> > _______________________________________________
>> >> > Paparazzi-devel mailing list
>> >> > address@hidden
>> >> > https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>> >> >
>> >> >
>> >>
>> >> _______________________________________________
>> >> Paparazzi-devel mailing list
>> >> address@hidden
>> >> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>> >
>> >
>> > _______________________________________________
>> > Paparazzi-devel mailing list
>> > address@hidden
>> > https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>> >
>> >
>>
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden
>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>



reply via email to

[Prev in Thread] Current Thread [Next in Thread]