paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Configuring the gps


From: Chris Gough
Subject: Re: [Paparazzi-devel] Configuring the gps
Date: Thu, 25 Aug 2011 09:28:58 +1000

I've never seen that before, perhaps it is broken.

It's a long shot, but the plug on those gs407's is not ideal, are you
sure the connection is physically sound? maybe a fault on the RX line
could cause the behavior you described.

Chris Gough


On Thu, Aug 25, 2011 at 4:15 AM, Joseph Wagster <address@hidden> wrote:
> I tried using windows xp today (still v6.20 couldn't get 6.02) It still
> didn't work. Auto baudrate seemed to be all over the place. It randomly had
> connection at different baudeates. It wouldn't have my settings after saving
> and cycling power. I called unlock but their guy kept saying to make sure we
> saved the config. After I made it apparent I had done that he said to make
> sure success is shown under ack, but I never get success or failure.
>
> Thank you,
> Joey
>
> On Aug 23, 2011 9:09 PM, "Joseph Wagster" <address@hidden> wrote:
>> Im dual booting. It didn't work on maverick. It didn't seem to work on my
>> windows 7 either. Maybe ill give a virtual xp as well.
>>
>> Thank you,
>> Joey
>> On Aug 23, 2011 7:10 PM, "Chris Gough" <address@hidden>
>> wrote:
>>> Hi Joey,
>>>
>>> Are you trying to use u-center via wine? I had no joy from that
>>> (u-center ~v6.02 I think, debian squeeze), but XP on a VirtualBox
>>> works fine for me.
>>>
>>> Chris Gough
>>>
>>> On Wed, Aug 24, 2011 at 10:08 AM, Joseph Wagster <address@hidden>
>> wrote:
>>>> Hello,
>>>>
>>>> Im working on maverick with the Lisa/l and can't seem to get gps
>>>> working.
>> I
>>>> tried u- center but got no signal. It seemed similar to configuring the
>>>> modems but I cant tell whats wrong. I followed the steps on the wiki and
>>>> used a ftdi for tx and rx to usb. I used the autopilot as a power source
>> and
>>>> the gs407 helical gps antenna from sparkfun. Also the manual didn't help
>> for
>>>> ucenter. I checked continuity and don't know what's wrong. The baudrate
>> is
>>>> the same as the airframe file.
>>>>
>>>> Thank you,
>>>> Joey
>>>>
>>>> _______________________________________________
>>>> Paparazzi-devel mailing list
>>>> address@hidden
>>>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>>>
>>>>
>>>
>>>
>>>
>>> --
>>> .
>>>
>>> _______________________________________________
>>> Paparazzi-devel mailing list
>>> address@hidden
>>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>



-- 
.



reply via email to

[Prev in Thread] Current Thread [Next in Thread]