|
From: | Eduardo lavratti |
Subject: | Re: [Paparazzi-devel] Turning on/off motors on Lisa/L octocopter |
Date: | Wed, 7 Dec 2011 01:54:12 +0000 |
to start the motor put the throttle down + yaw right or yaw right
to stop the same. if motor not start, try power down only the lisa and power again. Dont power down the escs. If motors start you have the same issue i addressed in github today. You need the ACCTUATOR_DELAY_TIME in airframe. regards. Date: Wed, 7 Dec 2011 01:42:30 +0100 From: address@hidden To: address@hidden Subject: [Paparazzi-devel] Turning on/off motors on Lisa/L octocopter Hi I do only have two of the eight motors connected to the mkk board at the moment and wanted to see if the motors basically work and rotate in the right direction before proceeding. I spent a couple of hours trying to get the motors to activate which seemed to happen now and again by chance. Or so I thought ;)
It seems that the motors first need to be activated by holding the yaw stick all the way to one side and then the motors start up in idle. Pushing them all the way to the side again turns it off. Really? I know I have seen other types of copters getting armed this way but don't recall seeing anything mentioning this with Paparazzi...oh...is or is the BL-Ctrl? It took me a while to find out what the arming trigger was.
Thanks, Simon _______________________________________________ Paparazzi-devel mailing list address@hidden https://lists.nongnu.org/mailman/listinfo/paparazzi-devel |
[Prev in Thread] | Current Thread | [Next in Thread] |