paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] IMU in Europe


From: limaiem imed
Subject: Re: [Paparazzi-devel] IMU in Europe
Date: Fri, 23 Mar 2012 12:18:26 +0100

thank you for this link,

what about those IMUs: some of them are using the MPU-6XXX family but there is no EEPROM in the board. Could the IMU 10OF work directly on the paparazzi LPC2148 based AP ?

thanks a lot

Photo de l'objet

29,90 €

+3,65 €

21j 1h 34m

Photo de l'objet

69,90 €

+4,50 €

3j 4h 52m

Photo de l'objet

39,90 €

+4,50 €

19j 2h 29m

Photo de l'objet

32,90 €

+3,65 €

4j 5h 5m

Photo de l'objet

51,90 €

+4,50 €

7j 3h 42m

Photo de l'objet

43,90 €

+4,50 €

7j 5h 42m

Photo de l'objet

39,90 €

+4,50 €

9j 7h 44m

Photo de l'objet

67,90 €

+4,50 €

3j 4h 25m

Photo de l'objet



Imed LIMAIEM
address@hidden


On Thu, Mar 22, 2012 at 10:15 AM, Prof. Dr.-Ing. Heinrich Warmers <address@hidden> wrote:
hi,
for normal configuration and the LPC2148 it seems to be the small sparkefun. http://www.watterott.com/de/IMU-Digital-Combo-Board-6-Degrees-of-Freedom-ITG3200/ADXL345
It runs out of the box..
regards

Heinrich

limaiem imed schrieb:
Hi all,
for those who are in Europe what is the best solution to buy an IMU for Paparazzi ?
regards,

Imed LIMAIEM
address@hidden

_______________________________________________ Paparazzi-devel mailing list address@hidden https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel



reply via email to

[Prev in Thread] Current Thread [Next in Thread]