On Mon, Apr 23, 2012 at 9:10 AM, Xavier RIVIERE <address@hidden> wrote:
Hi,
Well, I don't know what "github branch" I'm using... I get the last version using "git pull" before to post :)
Here is the error for test_telemetry
/home/aero/paparazzi/var/LezGaui/test_telemetry/test/test_telemetry.o: In function `main_periodic':
/home/aero/paparazzi/sw/airborne/test/test_telemetry.c:53: undefined reference to `uart_check_free_space'
/home/aero/paparazzi/sw/airborne/test/test_telemetry.c:53: undefined reference to `uart2'
/home/aero/paparazzi/var/LezGaui/test_telemetry/arch/stm32/mcu_periph/uart_arch.o: In function `uart2_init':
/home/aero/paparazzi/sw/airborne/arch/stm32/mcu_periph/uart_arch.c:151: undefined reference to `uart_periph_init'
/home/aero/paparazzi/sw/airborne/arch/stm32/mcu_periph/uart_arch.c:175: undefined reference to `uart2'
/home/aero/paparazzi/var/LezGaui/test_telemetry/arch/stm32/mcu_periph/uart_arch.o: In function `usart_irq_handler':
/home/aero/paparazzi/sw/airborne/arch/stm32/mcu_periph/uart_arch.c:98: undefined reference to `uart2'
collect2: ld returned 1 exit status
Here is the error for test_actuators_mkk
CC /home/aero/paparazzi/var/LezGaui/test_actuators_mkk/mcu_periph/i2c.o
CC /home/aero/paparazzi/var/LezGaui/test_actuators_mkk/arch/stm32/mcu_periph/i2c_arch.o
arch/stm32/mcu_periph/i2c_arch.c: In function 'i2c1_ev_irq_handler':
arch/stm32/mcu_periph/i2c_arch.c:507:3: warning: implicit declaration of function 'i2c_event' [-Wimplicit-function-declaration]
arch/stm32/mcu_periph/i2c_arch.c:507:3: warning: nested extern declaration of 'i2c_event' [-Wnested-externs]
arch/stm32/mcu_periph/i2c_arch.c: In function 'i2c1_er_irq_handler':
arch/stm32/mcu_periph/i2c_arch.c:513:3: warning: implicit declaration of function 'i2c_error' [-Wimplicit-function-declaration]
arch/stm32/mcu_periph/i2c_arch.c:513:3: warning: nested extern declaration of 'i2c_error' [-Wnested-externs]
arch/stm32/mcu_periph/i2c_arch.c: At top level:
arch/stm32/mcu_periph/i2c_arch.c:11:20: warning: 'i2c_hard_reset' used but never defined [enabled by default]
arch/stm32/mcu_periph/i2c_arch.c:12:20: warning: 'i2c_reset_init' used but never defined [enabled by default]
LD /home/aero/paparazzi/var/LezGaui/test_actuators_mkk/test_actuators_mkk.elf
/home/aero/paparazzi/var/LezGaui/test_actuators_mkk/arch/stm32/mcu_periph/i2c_arch.o: In function `i2c1_hw_init':
/home/aero/paparazzi/sw/airborne/arch/stm32/mcu_periph/i2c_arch.c:499: undefined reference to `i2c_reset_init'
/home/aero/paparazzi/var/LezGaui/test_actuators_mkk/arch/stm32/mcu_periph/i2c_arch.o: In function `i2c1_ev_irq_handler':
/home/aero/paparazzi/sw/airborne/arch/stm32/mcu_periph/i2c_arch.c:507: undefined reference to `i2c_event'
/home/aero/paparazzi/var/LezGaui/test_actuators_mkk/arch/stm32/mcu_periph/i2c_arch.o: In function `i2c1_er_irq_handler':
/home/aero/paparazzi/sw/airborne/arch/stm32/mcu_periph/i2c_arch.c:513: undefined reference to `i2c_error'
collect2: ld returned 1 exit status
Here is my airframe firmware declaration
<firmware name="rotorcraft">
<target name="ap" board="lisa_l_1.1"/>
<define name="USE_ADAPT_HOVER" />
<define name="GUIDANCE_H_USE_REF" />
<subsystem name="radio_control" type="ppm"/>
<subsystem name="actuators" type="mkk"/>
<subsystem name="telemetry" type="transparent"/>
<subsystem name="imu" type="aspirin_v1.5"/>
<subsystem name="gps" type="ublox"/>
<subsystem name="ahrs" type="int_cmpl_euler">
<define name="AHRS_MAG_UPDATE_YAW_ONLY"/>
</subsystem>
<subsystem name="ins" type="hff"/>
<subsystem name="stabilization" type="euler"/>
<configure name="CPU_LED" value="3"/>
<configure name="RADIO_CONTROL_LED" value="5"/>
<configure name="GPS_LED" value="7"/>
</firmware>
<firmware name="lisa_l_test_progs">
<target name="tunnel" board="lisa_l_1.1"/>
<target name="test_led" board="lisa_l_1.1"/>
<target name="test_uart" board="lisa_l_1.1"/>
<target name="test_servos" board="lisa_l_1.1"/>
<target name="test_telemetry" board="lisa_l_1.1"/>
<target name="test_baro" board="lisa_l_1.1"/>
<target name="test_imu_b2" board="lisa_l_1.1"/>
<target name="test_imu_b2_2" board="lisa_l_1.1"/>
<target name="test_imu_aspirin" board="lisa_l_1.1"/>
<target name="test_rc_spektrum" board="lisa_l_1.1"/>
<target name="test_rc_ppm" board="lisa_l_1.1"/>
<target name="test_adc" board="lisa_l_1.1"/>
<target name="test_hmc5843" board="lisa_l_1.1"/>
<target name="test_itg3200" board="lisa_l_1.1"/>
<target name="test_adxl345" board="lisa_l_1.1"/>
<target name="test_esc_mkk_simple" board="lisa_l_1.1"/>
<target name="test_esc_asctecv1_simple" board="lisa_l_1.1"/>
<target name="test_actuators_mkk" board="lisa_l_1.1"/>
<target name="test_actuators_asctecv1" board="lisa_l_1.1"/>
</firmware>
Le 19/04/2012 18:44, Stephen Dwyer a écrit :Hello, Knowing what compilation errors you are getting, as well as airframe file configuration and what code (i.e. github branch and last commit) you are using would be particularly helpful in identifying the problem :). Thanks, -Stephen Dwyer On Thu, Apr 19, 2012 at 10:41 AM, Xavier RIVIERE <address@hidden> wrote:Hi, I'm working on a homemade soldering Lisa/L, and I'm testing each fonction. FTDI and USB part is working well, and I can program the STM32. So I did. I run lisa/l some test programs for lisa : - test_LED - test_UART - test_baro But for "test_telemetry" and "test_actuators_mkk", I have compilation errors... My problem is that when I try to compile the complete software, I don't have any communication between the ARM and the Xbee. GCS remain blank, and when I check with an oscilloscope, there is no signal passing on the line. Any idea ?? To be complete, I have to say that I don't have any IMU connect yet. Maybe the problem come from that ? Thanks Xavier _______________________________________________ Paparazzi-devel mailing list address@hidden https://lists.nongnu.org/mailman/listinfo/paparazzi-devel_______________________________________________ Paparazzi-devel mailing list address@hidden https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
