Re: [Paparazzi-devel] Can not use AUTOSHOOT function.

[Christophe De Wagter]

That is more difficult. I think lisa-m has LED_4 and LED_5 connected to a header. See the wiki. But to make more leds that is more difficult.

-Christophe 

On Sat, Aug 4, 2012 at 2:25 PM, Marvin Wang <address@hidden> wrote:

hi Christophe

thank you !  i  set the

<section name="DIGITAL_CAMERA" prefix="DC_">

in my airframe , and it works !  the gcs now shows the yellow dot .

i have a question about the led port.

<load name="digital_cam.xml">
    <define name="DC_SHUTTER_LED" value="5"/>
    <define name="LED_5_BANK" value="1"/>
    <define name="LED_5_PIN" value="18"/>
    <define name="PUSH" value="LED_ON" />
    <define name="RELEASE" value="LED_OFF" />
    <define name="DC_SHUTTER_DELAY" value="1" unit="quarter_second"/>

 </load>

i use the lisa m 2.0 so i want to use the GPIO Port to trigger the DC
shutter. and i check the sch the GPIO has an digital IO , 53 pin of
the stm32 , so  how to set the value of DC_SHUTTER_LED ?


thanks

Marvin

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel