Re: [Paparazzi-devel] Configuration of a distance based autoshoot function with Yapa2

[Balazs GATI]

Hi,

Not exactly. If you use the dc.xml settings file, you will get a tab 
named "dc". The second parameter on the tab is "dc_autoshoot". If you 
set the value of 1, (and commit) the camera will start shoot periodic.
If you set to 0, the camera will stop to shoot.

Balazs



2012.09.19. 0:40 keltezéssel, Jorn Anke írta:
> Thanks for clarifying. My adc channels are not in use, so I can use one
> of them. I can however not find any reference to their pin_nr or
> pin_bank on the Yapa2 wiki for, for setting:
>
>      <define name="DC_SHUTTER_LED" value="#"/>
>      <define name="LED_6_BANK" value="#"/>
>      <define name="LED_6_PIN" value="#"/>
>
> During testing, I also found out adc1 -or 2 (the one closest to the usb)
> was constantly high +3.3V. Is this as it should be?
>
> Balazs,I did try tofollow your advice to: "test the hardware on the ground in 
> periodic mode (you can start it
> manualy in the GCS)".
> In the "Modules" tab on the gcs, there is a module named "led_cam_ctrl_p" which 
> can be started or stopped.
> Can I use this switch to start/stop e.g. the periodic/time based trigger?
>
> Cheers,
>
> Jorn
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

--
Balazs GATI, PhD
     Department of Aircraft and Ships
     Budapest University of Technology and Economics

Address:   Budapest
          Stoczek u 6. J. ép. 423
          1111
Tel:       +(36)-1-463-1960
Fax:       +(36)-1-463-3080
Homepage: http://rht.bme.hu/~gatib/