[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Paparazzi-devel] Lisa m firmware upload problem help
From: |
Chris |
Subject: |
Re: [Paparazzi-devel] Lisa m firmware upload problem help |
Date: |
Thu, 04 Oct 2012 20:23:20 +0300 |
User-agent: |
Mozilla/5.0 (X11; Linux i686; rv:15.0) Gecko/20120912 Thunderbird/15.0.1 |
Hi Sergey
Yes it works just fine with sudo ./paparazzi
I googled this and it seems that i am not alone a lot of people have
problems uploading firmwares
in 12.04.
BTW i also changed the files in order to move the PPM input but instead
of removing TIM2 interupt
in ppm_arch.c i wrapped both TIM1 and TIM2 interupts like this:
#ifdef USE_TIM1_IRQ
#pragma message "UART1 RX pin is used for PPM input"
.
. code for TIM1
.
#elif defined(USE_TIM2_IRQ)
#pragma message "SERVO 6 signal pin is used for PPM input"
.
. code for TIM2
.
#endif
I haven't tested this and i already searching of a way to set this from
the airframe file.....
It should work...
Chris
On 10/04/2012 07:00 PM, address@hidden wrote:
Have you tried to start paparazzi with sudo?
sudo ./paparazzi
Regards,
Sergey.
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Re: [Paparazzi-devel] Lisa m firmware upload problem help,
Chris <=