paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] lisa adc problem #2


From: Felix Ruess
Subject: Re: [Paparazzi-devel] lisa adc problem #2
Date: Tue, 9 Oct 2012 18:47:23 +0200

See https://github.com/paparazzi/paparazzi/issues/294 and associated pull request. Feel free to test it ;-)

On Tue, Oct 9, 2012 at 6:25 PM, Chris <address@hidden> wrote:
That is wonderfull....
I think this will be the best solution, now off to go get me one of those sensors :-)
I will let you know.
Btw although in simulation i can read my 33.6 volts just fine in flying session
the voltage indication in the GCS is alternating between 33.6 and 8.1 (overflow) every 0.5 seconds like it is reading the volt value from two sources....
There are more things that need to be changed except a message, "vsupply" "electrical.vsupply" and "fbw_state->vsupply" uint8_t type variable in the airborne code i think.
I will win!  :-)
Chris




On 10/09/2012 07:00 PM, paparazzi-devel-request@nongnu.org wrote:
Send Paparazzi-devel mailing list submissions to
        address@hidden

To subscribe or unsubscribe via the World Wide Web, visit
        https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
or, via email, send a message with subject or body 'help' to
        paparazzi-devel-request@nongnu.org

You can reach the person managing the list at
        address@hiddenorg

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Paparazzi-devel digest..."


Today's Topics:

    1. Re: lisa adc problem #2 (Gerard Toonstra)


----------------------------------------------------------------------

Message: 1
Date: Tue, 9 Oct 2012 09:58:26 -0300
From: Gerard Toonstra <address@hidden>
To: address@hidden
Subject: Re: [Paparazzi-devel] lisa adc problem #2
Message-ID:
        <CAM5819S4k+qoX7vz93d-N3zo9pvRFwShg_address@hiddencom>
Content-Type: text/plain; charset="utf-8"


I've added support in v4.1 or v4.0 for the ezosd current sensor. Could be
interesting for you too?


It interfaces using the i2c bus on i2c1 and is able to supply 5V to the
board. The 5v supply is used for the mcu,
gps and chip for making an "OSD" on the other board, so I'm quite certain
it can handle the load, although I
never tested this.

See "conf/modules/ezcurrent.xml". Define "DISABLE_ELECTRICAL", so that the
general battery checker on ADC
doesn't overwrite the values. Let me know if you encounter any issues.

Rgds,

Gerard

On Tue, Oct 9, 2012 at 2:10 AM, Chris Efstathiou <address@hidden>wrote:

Hi Gerard.
I think i will agree with you, you are right.
I will try to use ADC1 instead or back to servo 6 ppm output.
I almost went crazy yesterday....
Chris

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nongnu.org/archive/html/paparazzi-devel/attachments/20121009/48663695/attachment.html>

------------------------------


_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel


End of Paparazzi-devel Digest, Vol 103, Issue 28
************************************************



_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel


reply via email to

[Prev in Thread] Current Thread [Next in Thread]