|
From: | Jorn Anke |
Subject: | Re: [Paparazzi-devel] Configuration of a distance based autoshoot function with Yapa2 |
Date: | Thu, 11 Oct 2012 21:34:06 +0200 |
In order to switch off the power from the pin defined for the camera trigger; is it possible to send a "RELEASE" command manually to the autopilot?
Ref: <define name="RELEASE" value="LED_OFF" /> Or better, set "LED_OFF" as default value for in one of the configuration files? Thanks, Jorn From: address@hidden To: address@hidden Subject: RE: Configuration of a distance based autoshoot function with Yapa2 Date: Tue, 9 Oct 2012 00:48:59 +0200 Hi, I have one more problem with getting the camera trigger to behave as desired. Basically the shutter script works, but the default state of the trigger is "on", from the board is powered. Meaning the pin is outputting +3.3V and resulting the camera to shoot at the fastest possible rate. When the time-based trigger (Autoshoot) is started the shooting rate slows down to whatever rate is programmed. So the question is; how can I change the default state of the trigger to off? Cheers, Jorn The relevant part of the airframe file now looks like this: <section name="DIGITAL_CAMERA" prefix="DC_"> <define name="AUTOSHOOT_QUARTERSEC_PERIOD" value="16" unit="quarter_second"/> <!-- <define name="AUTOSHOOT_METER_GRID" value="40" unit="meter"/> --> </section> <modules> <load name="ins_chimu_spi.xml" > <!-- <define name="CHIMU_BIG_ENDIAN" /> --> </load> <!-- <load name="dc.xml"/> --> <load name="digital_cam.xml"> <define name="DC_SHUTTER_LED" value="7"/> <define name="LED_7_BANK" value="0"/> <define name="LED_7_PIN" value="21"/> <define name="USE_LED_7" value="1"/> <define name="PUSH" value="LED_ON" /> <define name="RELEASE" value="LED_OFF" /> <define name="DC_SHUTTER_DELAY" value="8" unit="quarter_second"/> </load> </modules> From: address@hidden To: address@hidden Subject: RE: Configuration of a distance based autoshoot function with Yapa2 Date: Fri, 21 Sep 2012 21:55:18 +0200 A HUGE Thanks to all who have contributed and helped with this issue! Finally everything is working! The last missing piece turned out be the: <define name="USE_LED_7" value="1"/> line. Now I am looking forward to put everything together and start flight-testing. Cheers! Jorn |
[Prev in Thread] | Current Thread | [Next in Thread] |