Re: [Paparazzi-devel] New Autopilot hardware for 16 Euros

[limaiem imed]

I have little know how in Electronics and some good skills in programming.

What I can't figure out is that since we have the same micro-controller as the one used for LISA board and the same free connectors and assuming that we can add resistor, capacitor where in some places ... why can't we load the code in the micro-controller ? 

am I missing something ?

Imed LIMAIEM
address@hidden

On Mon, Nov 26, 2012 at 12:34 AM, Eduardo lavratti <address@hidden> wrote:

Its complex ...
you have know how in electronics and C programming ?

I dont think the cheap universal board with processor and IMU are good to use as autopilot.

---

Date: Sun, 25 Nov 2012 20:45:17 +0100
From: address@hidden
To: address@hidden
Subject: Re: [Paparazzi-devel] New Autopilot hardware for 16 Euros

since LISA/M has the same processor the code should be easy to be loaded in this ship no ?

the only job to make is the get the right interface with GPS, IMU and the TX/RX ?

or I am missing something more complex ?



Imed LIMAIEM
address@hidden

On Tue, Nov 13, 2012 at 8:47 PM, Prof. Dr.-Ing. Heinrich Warmers <address@hidden> wrote:

Hi,
a new autopilot hardware for only 16 Euros ?
http://www.watterott.com/de/STM32F3DISCOVERY
How is the first to port paparazzi on it?

Regards

Heinrich


_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________ Paparazzi-devel mailing list address@hidden https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel