[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Paparazzi-devel] PT1000
From: |
Prof. Dr.-Ing. Heinrich Warmers |
Subject: |
Re: [Paparazzi-devel] PT1000 |
Date: |
Mon, 04 Mar 2013 23:46:07 +0100 |
User-agent: |
Mozilla/5.0 (Windows; U; Windows NT 5.0; de-DE; rv:1.4) Gecko/20030619 Netscape/7.1 (ax) |
Hi,
think there is a driver for this i2c interface.
But the i2c interface is a 5V type and need a power Voltage greater
than 6V.
Heinrich
Árni Þorvaldsson schrieb:
Hi
I am going to use pt1000 temperature sensor on my airframe and was wondering
how the setup should be.
this is the sensor that I am using
http://www.conrad-uk.com/ce/en/product/172041/Heraeus-M222-Pt-1000-platinum-temperature-sensor-70-500-C-3850-ppmK-Class-BF0-30-Signal-DIN-EN-60751
I am going to connect it through i2c but would I then need a breakout board for
the sensor ( like this one..
http://www.conrad-uk.com/ce/en/product/502001/Hygrosens-TEMOD-I2C-R1-temperature-sensor-32-to-96-C/SHOP_AREA_37353)
If anyone is familiar with using the pt1000, please let me know about the best
set up.
regards Arni
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel