paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] motor command error on hexa------work arround prog


From: Christophe De Wagter
Subject: Re: [Paparazzi-devel] motor command error on hexa------work arround progress
Date: Fri, 22 Mar 2013 09:15:03 +0100

Is there any chance you might be able to put a logic analyser on the I2C bus and share the results? 

e.g. http://www.saleae.com/logic 

-Christophe 


On Thu, Mar 21, 2013 at 8:18 PM, Eduardo lavratti <address@hidden> wrote:
I do some tests using mkk controler 2 months ago.
With 4 motor it fly correct.
With 6 motor i have problem (some time one motor fail)
with 8 motor 2 / 3 motor fail.

After the initial tests the i2c level translator of my lisa has burned.

Date: Thu, 21 Mar 2013 20:15:29 +0100
From: address@hidden
To: address@hidden
Subject: Re: [Paparazzi-devel] motor command error on hexa------work arround progress


hi felix,

My quad fly correctly with non consecutive adress....

I heva updated to master on monday.

Eric




Le 21/03/2013 19:15, Felix Ruess a écrit :
Hi,

This is weird... which paparazzi_version are you using?

Also make sure you don't get any warnings, they are (usually) there for a reason.
E.g with your previous config (starting servos at index 1) you should have gotten a warning about array indices being out of bounds...
That is a tell-tale sign that you misconfigured something.

My fraser quadrotor airframe works fine with non-consecutive addresses: https://github.com/paparazzi/paparazzi/blob/master/conf/airframes/fraser_lisa_m_rotorcraft.xml

Cheers, Felix


On Thu, Mar 21, 2013 at 6:23 PM, Eric BAHIER <address@hidden> wrote:
Hi Seguey,

thank for you help.

If I use the basic motor order  from 0x52 to 0x5c  It is ok. As your.

In the past you can fit the ESC as is come.... with no specific order, and you can adapt it in the XML file.

Today if I try to adapte.... it fail....



Eric






Le 21/03/2013 17:16, Sergey Krukowski a écrit :

Eric, try to compare your setup with my hexa example.

https://github.com/softsr/paparazzi/blob/krooz_port/conf/airframes/krooz_1_0_hexa_mkk.xml

It works for me on mkk hexarotor, probably you’ll find what is actually wrong.



_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

-- 
************************************
Lez Concept EURL

Eric BAHIER
15 chemin neuf
34 980 Montferrier sur LEZ
France

Tel : 33 4 67 59 92 53
Fax : 33 9 59 15 92 53
************************************

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel




_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

-- 
************************************
Lez Concept EURL

Eric BAHIER
15 chemin neuf
34 980 Montferrier sur LEZ
France

Tel : 33 4 67 59 92 53
Fax : 33 9 59 15 92 53
************************************

_______________________________________________ Paparazzi-devel mailing list address@hidden https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel



reply via email to

[Prev in Thread] Current Thread [Next in Thread]