Re: [Paparazzi-devel] motor command error on hexa------work arround progress

[Eduardo lavratti]

I updated the my local copy yesterday. ( i am using master)
Thank for you considerations.

> To: address@hidden
> Date: Mon, 25 Mar 2013 09:14:34 +0100
> From: address@hidden
> Subject: Re: [Paparazzi-devel] motor command error on hexa------work arround progress
>
> Hi Eduardo!
> If the problem is still actuall, try to checkout the latest
> actuators_mkk.c file from the master branch.
> I've added the i2c submission control, so the actual queue length could be
> leaved unchanged.
> I've also experienced problems with 8 mkk controllers, they a very
> sensitive to the bus speed. With the 400kHz there going to be the bus
> errors anyway. I've had problems with 8 mkk sometimes even with the bus
> speed about 60kHz. So try to let your bus speed down. But when you let
> your bus speed down, and it is not sufficient to control all the motors
> once per periodic time, the queue length increase is not going to help. So
> then you have to use the fixed actuators_mkk.c file.
> But anyway, I've experienced a crash with the stock MK autopilot because
> of i2c errors problem, so imho the solution with more than 6 mkk
> controllers is not reliable enough. I wouldn't recommend that.
> Regards,
> Sergey
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel