|
From: | Felix Ruess |
Subject: | Re: [Paparazzi-devel] motor command error on hexa------work arround progress |
Date: | Mon, 25 Mar 2013 14:53:11 +0100 |
Sergey,
changing the scl time i change the i2c clock frequency right ?
Well, i changed the scl time from 20 to 50 and 150 and the i2c clock continue away the same 48khz.
i use this config to change scl time
<define name="MKK_I2C_SCL_TIME" value="50"/>
i to some mistake ?
Subject: Re: [Paparazzi-devel] motor command error on hexa------work arround progress
I updated the my local copy yesterday. ( i am using master)
Thank for you considerations.> To: address@hidden
> Date: Mon, 25 Mar 2013 09:14:34 +0100
> From: address@hidden
> Subject: Re: [Paparazzi-devel] motor command error on hexa------work arround progress
>
> Hi Eduardo!
> If the problem is still actuall, try to checkout the latest
> actuators_mkk.c file from the master branch.
> I've added the i2c submission control, so the actual queue length could be
> leaved unchanged.
> I've also experienced problems with 8 mkk controllers, they a very
> sensitive to the bus speed. With the 400kHz there going to be the bus
> errors anyway. I've had problems with 8 mkk sometimes even with the bus
> speed about 60kHz. So try to let your bus speed down. But when you let
> your bus speed down, and it is not sufficient to control all the motors
> once per periodic time, the queue length increase is not going to help. So
> then you have to use the fixed actuators_mkk.c file.
> But anyway, I've experienced a crash with the stock MK autopilot because
> of i2c errors problem, so imho the solution with more than 6 mkk
> controllers is not reliable enough. I wouldn't recommend that.
> Regards,
> Sergey
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________ Paparazzi-devel mailing list address@hidden https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
[Prev in Thread] | Current Thread | [Next in Thread] |