[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Trouble getting Eagle Tree Airspeed Sensor working

From: Chris
Subject: Re: [Paparazzi-devel] Trouble getting Eagle Tree Airspeed Sensor working
Date: Sun, 09 Jun 2013 20:32:09 +0300
User-agent: Mozilla/5.0 (X11; Linux i686; rv:17.0) Gecko/20130510 Thunderbird/17.0.6

I never solved it, mine was jamming the whole I2C channel, so i went the analog way with the MPXV7002DP and i didn't regretted it, it works fine. If you go this way also email me if you need the driver files which are really an ADC readout module and an averaging filter. You can also use the auxiliary ADC channels for the sensor as the wiki describes.

On 06/09/2013 07:00 PM, address@hidden wrote:
I recently got the Eagle Tree airspeed sensor so that I can use the energy
based altitude control loops with my plane. However, when I follow the
instructions as per here:  the
code build's fine, but once I upload it to the TWOG, there is no telemetry
sent. I believe this is a different problem than the widely reported issue
of the Eagle Tree Sensor only working when the autopilot is flashed, not
when the autopilot was booted up normally.

reply via email to

[Prev in Thread] Current Thread [Next in Thread]