[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] I2C port and Pull-Up Resistors for YAPA2

From: Helge Walle
Subject: Re: [Paparazzi-devel] I2C port and Pull-Up Resistors for YAPA2
Date: Fri, 14 Jun 2013 20:10:58 +0200

According to the manual the ETS Airspeed sensor needs external pullups. From the schematics it seems the YAPA has 10k pullups.
In my working setup (with TWOG which have 10k resistors) I also have the 4.7k pullups provided on the Sparkfun IMU board.

So the total resistance on the SDA and SCL lines are10k in parallell with 4.7k, which is working with my TWOG.
2013/6/14 GalapagosUAV <address@hidden>
Hello everyone,

I'm trying to connect an Eagle Tree Airspeed sensor to the I2C port of my YAPA2 and I would like to make sure if I need to connect the Pull-Up Resistors in order for the bus to work ( What are the recommended values for this resistors?

Best Regards,

Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]