[Paparazzi-devel] voltage drop on full throttle

[Refik Sever]

Hello,

After several months of hard work, today we  performed our first flight with paparazzi using manual mode. We also tried auto1 and auto2, for short periods. It was not too bad. It couldn't circle using auto2. Tomorrow we will try to tune the aircraft and play with the control gains.

There is one problem. When we give full throttle, the voltage drops by 0.8V. Is it a normal situation?

We had a crash last month, and all the cables from battery to ESC were broken, and we re-soldered them. Is this voltage drop occur due to the resistance of the re-soldered cables?

Cheers,
Refik