paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] stm32f4 spi errors


From: Chris
Subject: Re: [Paparazzi-devel] stm32f4 spi errors
Date: Fri, 05 Jul 2013 17:02:03 +0300
User-agent: Mozilla/5.0 (X11; Linux i686; rv:17.0) Gecko/20130623 Thunderbird/17.0.7

Hi Felix.
As always you are very helpfull, thank you!
Now i use the ap type as "krooz_sd" (with the proper makefile found in the master branch also)
but i still get an error:

CC /home/hendrix/paparazzi/var/krooz_fixed_wing/ap/arch/stm32/subsystems/radio_control/ppm_arch.o
arch/stm32/subsystems/radio_control/ppm_arch.c: In function 'ppm_arch_init':
arch/stm32/subsystems/radio_control/ppm_arch.c:115:32: error: 'PPM_CC_IE' undeclared (first use in this function)
arch/stm32/subsystems/radio_control/ppm_arch.c:115:32: note: each undeclared identifier is reported only once for each function it appears in
make[1]: *** [/home/hendrix/paparazzi/var/krooz_fixed_wing/ap/arch/stm32/subsystems/radio_control/ppm_arch.o] Error 1
make[1]: Leaving directory `/home/hendrix/paparazzi/sw/airborne'
make: *** [ap.compile] Error 2

Just to let you know.
Btw why those files are not downloaded when i do a git pull?
Chris

>>our SPI HAL is not ported to the F4 yet. See also https://github.com/paparazzi/paparazzi/issues/457.
>> think this is only thing remaining for full F4 support (e.g. spektrum is done but not tested).

>>Regarding the board file for the krooz autopilot: There is one for the krooz_sd.
>>Cheers, Felix


reply via email to

[Prev in Thread] Current Thread [Next in Thread]