paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Newbee question Apogee or KroozSD


From: Michel GORRAZ
Subject: Re: [Paparazzi-devel] Newbee question Apogee or KroozSD
Date: Wed, 31 Jul 2013 14:06:10 +0200

MPU-9150 is available @ Digikey
http://www.digikey.com/product-detail/en/MPU-9150/1428-1009-1-ND/4038014

As Gautier said, don't forget Apogee has been mainly designed for small aircraft and it has been flying only with the fixedwing firmware until now.
Designing a new rotorcraft dedicated Apogee-like board is on the ToDo list...not at the fist line :)

Michel
ENAC Team


2013/7/31 Felix Ruess <address@hidden>
Hi,

I'm not sure if the mpu9150 is already available. The first apogee test boards that were made still had the mpu6050.
Also there is no driver for the mpu9150 (with reading of the mag) yet, but once it's available it should be fairly easy to write a driver for it based on the mpu60x0 peripheral.

Cheers, Felix


On Wed, Jul 31, 2013 at 1:15 PM, Alexander Biersack <address@hidden> wrote:
Got you, so the Apogee with the 9150 has a magnetometer.
I just searched for magnet on the 9150 webpage and in the pdf, but they call it compass, so I missed it.

> The Apogee does not have a magnetometer, while the Krooz does, or am I mistaken? The IMU 9150 does not have one.
>
Sparkfun 9150 breakout board:

The MPU-9150 is a System in Package (SiP) that combines two chips: the MPU-6050, which contains a 3-axis gyroscope, 3-axis accelerometer, and an onboard Digital Motion Processor (DMP) capable of processing complex 9-axis MotionFusion algorithms; and the AK8975, a 3-axis digital compass



_______________________________________________


_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel



reply via email to

[Prev in Thread] Current Thread [Next in Thread]