paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] shaking on AUTO1


From: Eduardo lavratti
Subject: Re: [Paparazzi-devel] shaking on AUTO1
Date: Thu, 12 Sep 2013 08:45:44 -0300

very high pid gains or CG problem.


Date: Thu, 12 Sep 2013 13:29:22 +0200
From: address@hidden
To: address@hidden
Subject: Re: [Paparazzi-devel] shaking on AUTO1



2013/9/12 alonso acuña <address@hidden>
From looking at the log it seems the shaking is in pitch. The theta imu graph looks smooth while in manual and becomes jagged in auto1 with quick continuous ups and downs.


On Wed, Sep 11, 2013 at 6:16 PM, alonso acuña <address@hidden> wrote:
Hi. We tried the AUTO1 today and it maintained course fine but started to shake quite a bit. Also the response of the servos to left and right turns was too small and it was barely able to turn.  Is it supposed to use the rudder in these turns?

Thanks


_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel



_______________________________________________ Paparazzi-devel mailing list address@hidden https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

reply via email to

[Prev in Thread] Current Thread [Next in Thread]