paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] NEO7 gps test


From: ??d1.
Subject: Re: [Paparazzi-devel] NEO7 gps test
Date: Mon, 30 Sep 2013 20:45:32 +0800

Hey, Chris.
Neo 7 seems good, but I want to know a litter bit more.
What's the average accuracy of NEO 7 in your test?
Is it true tha NEO 7 can have update rate up to 10HZ?

I'm just trying to find a way to have a cm level precision outdoor position method, a previous post about RTK-GPS in the kiskstarter looks great but it's a bit expensive.

Regards.
------------------
Edward ZILONG HUANG
address@hidden department, Faculty of Engineering, CUHK
http://appsrv.cse.cuhk.edu.hk/~zlhuang2
 


------------------ Original ------------------
From:  "Chris";<address@hidden>;
Date:  Mon, Sep 30, 2013 03:59 PM
To:  "address@hidden"<address@hidden>;
Subject:  [Paparazzi-devel] NEO7 gps test

Hi.
Just to let all know that i just tested this gps
http://www.ebay.com/itm/281140867506?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
and it works really really good.
It's sensitivity is excellent and it locks in a second where all the
others i have need at least 30 seconds or don't lock at all in the same
spot.
I use the ubx center module because despite it's description IT DOES NOT
HAVE AN EEPROM like the hobbykings still excellent NEO6 GPS, only a
small battery or capacitor and it will loose it's settings after 15-30
minutes
I also don't know how resistant it is with interference from video
transmitters but it does have an active antenna with a SAW filter and it
does not get affected when on top of the stm32f4 cpu of the discovery
board i used for testing.
Maybe someone might know if we can benefit from the 10Hz refresh rate
NEO7 has and if ubx center needs to be updated to set the refresh rate also.


_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
.

reply via email to

[Prev in Thread] Current Thread [Next in Thread]