[Paparazzi-devel] Problem flashing Lisa/M on Ubuntu 13.10

[Jorn Anke]

Hi,

I am having problem uploading to my Lisa/M after updating to Ubuntu 13.10. I think the problem is that paparazzi can't find the USB-connection, but I am not able to fix it.

UDEV rules are set:
-  ATTRS{serial}=="A600eGeX"
- (sudo cp conf/system/udev/rules/50-paparazzi.rules /etc/udev/rules.d/  )

plugdev and dialout groups:
- sudo adduser jorn plugdev
- sudo adduser jorn dialout

Anyone who can see what I am doing wrong?

Cheers,

Jørn


Result when trying to upload:

RUN 'make -C /home/jorn/paparazzi -f Makefile.ac AIRCRAFT=My_Lisa_Skywalker ap.upload '
make: Entering directory `/home/jorn/paparazzi'
-----------------------------------------------------------------------
Paparazzi version v5.1_devel-640-g69684d1-dirty
-----------------------------------------------------------------------
My_Lisa_Skywalker
BUILD My_Lisa_Skywalker, TARGET ap
make[1]: Entering directory `/home/jorn/paparazzi'
make[1]: Leaving directory `/home/jorn/paparazzi'
make[1]: Entering directory `/home/jorn/paparazzi'
make[1]: Nothing to be done for `radio_ac_h'.
make[1]: Leaving directory `/home/jorn/paparazzi'
make[1]: Entering directory `/home/jorn/paparazzi'
make[1]: Nothing to be done for `flight_plan_ac_h'.
make[1]: Leaving directory `/home/jorn/paparazzi'
cd sw/airborne; make TARGET=ap all
Using "arch/stm32/lisa-m.ld" as ldscript for target "ap".
make[1]: Entering directory `/home/jorn/paparazzi/sw/airborne'

Using CC   = /opt/paparazzi/arm-multilib/bin/arm-none-eabi-gcc
Using LD   = /opt/paparazzi/arm-multilib/bin/arm-none-eabi-gcc
Using CP   = /opt/paparazzi/arm-multilib/bin/arm-none-eabi-objcopy
Using DMP  = /opt/paparazzi/arm-multilib/bin/arm-none-eabi-objdump
Using NM   = /opt/paparazzi/arm-multilib/bin/arm-none-eabi-nm
Using SIZE = /opt/paparazzi/arm-multilib/bin/arm-none-eabi-size
GCC version:
arm-none-eabi-gcc (GNU Tools for ARM Embedded Processors) 4.7.4 20130913 (release) [ARM/embedded-4_7-branch revision 202601]


Previous size:
/home/jorn/paparazzi/var/My_Lisa_Skywalker/ap/ap.elf  :
section              size         addr
.text             0x187ec    0x8002000
.data              0x3ff4   0x20000000
.bss               0x16e4   0x20003ff8
.debug_info       0x4000f          0x0
.debug_abbrev      0x853c          0x0
.debug_aranges     0x1ae8          0x0
.debug_line        0xd6fc          0x0
.debug_str         0x7eaa          0x0
.comment             0x70          0x0
.ARM.attributes      0x33          0x0
.debug_loc        0x1556b          0x0
.debug_ranges      0x4c08          0x0
.debug_frame       0x4c88          0x0
Total             0x9c33b



Current size:
/home/jorn/paparazzi/var/My_Lisa_Skywalker/ap/ap.elf  :
section              size         addr
.text             0x187ec    0x8002000
.data              0x3ff4   0x20000000
.bss               0x16e4   0x20003ff8
.debug_info       0x4000f          0x0
.debug_abbrev      0x853c          0x0
.debug_aranges     0x1ae8          0x0
.debug_line        0xd6fc          0x0
.debug_str         0x7eaa          0x0
.comment             0x70          0x0
.ARM.attributes      0x33          0x0
.debug_loc        0x1556b          0x0
.debug_ranges      0x4c08          0x0
.debug_frame       0x4c88          0x0
Total             0x9c33b


make[1]: Leaving directory `/home/jorn/paparazzi/sw/airborne'
cd sw/airborne; make TARGET=ap upload
Using "arch/stm32/lisa-m.ld" as ldscript for target "ap".
make[1]: Entering directory `/home/jorn/paparazzi/sw/airborne'
Using stm32 mem dfu loader
/usr/bin/python /home/jorn/paparazzi/sw/tools/dfu/stm32_mem.py   /home/jorn/paparazzi/var/My_Lisa_Skywalker/ap/ap.bin
...........................................................
No DFU devices found!
make[1]: *** [upload] Error 1
make[1]: Leaving directory `/home/jorn/paparazzi/sw/airborne'
make: *** [ap.upload] Error 2
make: Leaving directory `/home/jorn/paparazzi'

FAILED 'make -C /home/jorn/paparazzi -f Makefile.ac AIRCRAFT=My_Lisa_Skywalker ap.upload' with code 2