paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Quad Tilt Rotor using Lisa/M


From: Chris Gough
Subject: Re: [Paparazzi-devel] Quad Tilt Rotor using Lisa/M
Date: Thu, 16 Jan 2014 17:28:21 +1100

12 pounds, 60 inch span - did I read that right?

Chris Gough

On 16/01/2014, at 5:05 PM, "Richardson, Mark E C1C USAF USAFA CW/CS13"<address@hidden> wrote:

Hello everyone! I am working to build a transitional quadrotor similar to the quadshot except that it is not based on a flying wing, instead it is more of a large RC airplane with tilting rotors to change flight from quad to plane. I have been working with APM 2.5 and KK 2.0 boards so far but I have realized they aren’t as powerful to do that while still working with GPS.  I am wondering how hard it would be to modify the programming on the Lisa/M from the quadshot to something that meets my needs. I am looking at a 12 lb setup/60” wingspan with a Vtail controlling all forward flight (no ailerons). Any help or advise is highly appreciated- I’m only running windows so it looks like I will need to borrow a separate comp to run UBUNTU. We are a team working on our undergraduate Mechanical Engineering capstone project and unfortunately aren’t as well versed in all the UAV platforms as we could be. Our timeline is have a working/flying prototype by mid May.

 

Thanks!!

 

 

Mark E Richardson

United States Air Force Academy.

 

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

reply via email to

[Prev in Thread] Current Thread [Next in Thread]