paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] paparazzi with 2.4GHz


From: evan igor
Subject: Re: [Paparazzi-devel] paparazzi with 2.4GHz
Date: Fri, 14 Mar 2014 00:02:06 +0200

so what is the wrong thing i did for setting and does the radio.xml has effect with transmitter.
and how could i get these parameters for my transmitter


On Thu, Mar 13, 2014 at 9:35 PM, Felix Ruess <address@hidden> wrote:
This comment was misleading, corrected it...


On Thu, Mar 13, 2014 at 2:51 PM, evan igor <address@hidden> wrote:
and what is this CAUTION! This is only used for PPM transmitters so it does not apply to DSM/DSM2/FASST/FHSS or other 2.4Ghz radios.  in http://wiki.paparazziuav.org/wiki/Radio_Control
mean as i can use the 2.4 Ghz

sorry for any interrupts and thanks for help in advance :)


On Thu, Mar 13, 2014 at 3:34 PM, evan igor <address@hidden> wrote:
Hi all;
i tried the binding sequence, one question i connected the bind cable to the receiver so i connect between GND and signal pin as well as connecting GND with ADC1 pin in ANALOGL1.  or i shouldn't connect the binding cable to the receiver and only connect  GND with ADC1 pin in ANALOGL1.



On Thu, Mar 13, 2014 at 3:02 PM, Felix Ruess <address@hidden> wrote:


On Thu, Mar 13, 2014 at 1:37 PM, evan igor <address@hidden> wrote:
Hi,

the problem i face that i have orange receiver this one

and i have also transmitter spektrum dx5e
but i tried to connect them with paparazzi liza/m and no signal while i use this radio.xml   i attached


On Thu, Mar 13, 2014 at 2:07 PM, Chris <address@hidden> wrote:
of course as long as either you have a PPM signal available from the receiver like
some Frsky ones, Spectrum receivers also work afaik
This signal is often called combined PPM (cppm) and other names as it is essentially a wavetrain containing the pulse width of all servos.
All LRS type (long range system) receivers have a ppm output as nearly all autopilots need that signal.
Chris


On 03/13/2014 12:47 PM, evan igor wrote:
Hi,
does paparazzi wok with 2.4Ghz transmitter?


as this 

CAUTION! This is only used for PPM transmitters so it does not apply to DSM/DSM2/FASST/FHSS or other 2.4Ghz radios. 



_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel


_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel



_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel



_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel




_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel



_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel



reply via email to

[Prev in Thread] Current Thread [Next in Thread]