paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Telemetry upload - Xbee - Lisa_m_2


From: alonso acuña
Subject: Re: [Paparazzi-devel] Telemetry upload - Xbee - Lisa_m_2
Date: Wed, 14 May 2014 16:57:48 -0600

Hello. CTS and RTS are not required. You should check that the xbee on the a/c is set to transmit to the ground Xbee in the destination address high and low parameters. routing messaging mode should be 0.

And the ground xbee should have 
routing messaging mode = 1
destination addr high = 0
destination addr low = FFFF


On Wed, May 14, 2014 at 12:29 PM, mav_luv <address@hidden> wrote:
Hello everyone!

I have my xbee connected to a Lisa_m_2 and I can Receive data just fine.
When I then try to commit for example another telemetry setting (other than
default) or PID parameters from GCS nothing seems to happen. I have
connected Din and Dout to TX and RX respectively. Do I have to include CTS
and RTS somehow?

The telemetry is set to Transparent in my airframe file if that's relevant

I have no idea what's going on. Help would be greatly appreciated.

kv. mav_luv



--
View this message in context: http://lists.paparazziuav.org/Telemetry-upload-Xbee-Lisa-m-2-tp15387.html
Sent from the paparazzi-devel mailing list archive at Nabble.com.

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel


reply via email to

[Prev in Thread] Current Thread [Next in Thread]