paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] The master firmware of paparazzi is unstable


From: Felix Ruess
Subject: Re: [Paparazzi-devel] The master firmware of paparazzi is unstable
Date: Wed, 21 May 2014 20:14:24 +0200

You should never attempt to takeoff if throttle is killed, because it will immediately go to kill if you switch to AUTO.
If it goes into kill because of too low battery it will display BAT LOW CATASTROPHIC


On Wed, May 21, 2014 at 7:58 PM, Chris <address@hidden> wrote:
Felix should know better (always) about that read his post.
This warning usually means that the battery voltage is too low i think.
Chris



On 05/21/2014 07:37 PM, 心如烛光 wrote:
Hi,Chris!
    I have noticed something strange which has been ignored before.While the autopilot was initializing,the console of the paparazzi center returned "mayday,kill mode" automatically(I didn't touch anything of the GCS).Is there anything about the throttle failure with this?And if it is true,what should I do to avoid this again?Thanks a lot!


_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel


_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel



reply via email to

[Prev in Thread] Current Thread [Next in Thread]