paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Critical behaviour of baro_ms5611_i2c


From: Felix Ruess
Subject: Re: [Paparazzi-devel] Critical behaviour of baro_ms5611_i2c
Date: Thu, 5 Jun 2014 19:31:24 +0200

Hi Kevin,

Just checked again on my LisaMX with aspirin2.2 and I don't see any weird spikes like this.
You could try with latest master, if it still occurs, please post your full configuration.

Cheers, Felix


On Thu, Jun 5, 2014 at 3:50 PM, AFISH <address@hidden> wrote:
Hi Loic

I use a 3d printed case protect Lisa board. And there is no light get to the back side of the Lisa board where asiprit 2.2 IMU mounted.




Sent from Mailbox for iPhone


On Thu, Jun 5, 2014 at 5:23 AM, Loic Drumettaz <address@hidden> wrote:

Hi,

Please check that your baro is well protected from light. Baros are sensitive to light.

Regards

Loïc


2014-06-05 9:17 GMT+02:00 afishindouban <address@hidden>:
Hi Felix

As you mention below, Also I check the branch master sample Microjet_lisaM,
that configuration is same as your description.
So I just build and flash to my transition robotic Lisa/M2 AP. and the GCS
ALT number getting crazy. So I turn on RAW_SENSOR, I found baro_raw is not
stable at all. some time has peak value absolutely high. this should be the
reason of my ALT number get crazy? what could be the reason of that? I show
you the plotter of that to you.

<http://lists.paparazziuav.org/file/n15618/53.png>

Thank you so much

Kevin.


flixr wrote
> Hi,
>
> just
> <configure name="LISA_M_BARO" value="BARO_MS5611_SPI"/>
>  is enough.
> <define name="USE_BAROMETER" value="TRUE"/>
>  is only needed if you want to
> use for altitude estimation in
> <subsystem name="ins" type="alt_float"/>
> .
> <configure name="USE_BARO_BOARD" value="TRUE"/>
>  is not really needed (since
> TRUE by default on boards like Lisa/M that have a baro).
> Remove
> <define name="USE_SPI_SLAVE3"/>
>  and the baro modules.
>
> Cheers, Felix





--
View this message in context: http://lists.paparazziuav.org/Critical-behaviour-of-baro-ms5611-i2c-tp11592p15618.html
Sent from the paparazzi-devel mailing list archive at Nabble.com.

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel



_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel



reply via email to

[Prev in Thread] Current Thread [Next in Thread]