paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Debug PPM Lisa-L


From: Felix Ruess
Subject: Re: [Paparazzi-devel] Debug PPM Lisa-L
Date: Fri, 20 Jun 2014 22:29:09 +0200

Hi Tommy,

thanks a lot for catching this!
It should work now in master with your proposed fix. But actually the AFIO remap should be specified in the board file.
Would be great if you could test it with the lisa_l_pwm branch (added the AF remap to lisa_l board file with https://github.com/paparazzi/paparazzi/commit/6665181ab37fd77c9b325db78a54fcef20b36655

Cheers, Felix


On Fri, Jun 20, 2014 at 12:29 PM, tommy <address@hidden> wrote:
Hi,

After looking at what was dysfunctional in the lisa-L board. We found a
problem in the order of the GPIO initialisation.

You need to move the remap of TIM3 after the servo_gpio declaration in
paparazzi/sw/airborne/arch/stm32/subsystems/actuators/actuators_pwm_arch.c

here is the modified file : "http://pastebin.com/zFYZykBa"

Now my aircraft is working great.

regards,
Tommy




--
View this message in context: http://lists.paparazziuav.org/Debug-PPM-Lisa-L-tp15712.html
Sent from the paparazzi-devel mailing list archive at Nabble.com.

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel


reply via email to

[Prev in Thread] Current Thread [Next in Thread]