[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Auto2 take off question

From: afishindouban
Subject: Re: [Paparazzi-devel] Auto2 take off question
Date: Sat, 19 Jul 2014 10:31:35 -0700 (PDT)

Thank you so much Martin.

Sent from Mailbox for iPhone

On Sat, Jul 19, 2014 at 6:43 AM, Martin Mueller [via Paparazzi UAV] <[hidden email]> wrote:

Hi Kevin,

a simple solution is to have the aircraft fly at an (e.g. 20°) angle for
3 seconds without any waypoint navigation

  <block name="start">
   <attitude pitch="20" roll="0" throttle="0.99"
until="(autopilot_flight_time > 3)" vmode="throttle"/>
   <go wp="START"/>


On 07/18/2014 05:01 AM, afishindouban wrote:

> Hi everyone,
> I am testing a Bixler with master paparazzi, using sample
> bixler_lisa_m_2.xml and basic flight paln. it is a DCM INS without compass
> involved. What I want to do is that in auto2 mode, click take off, then
> click launch to have full throttle, then throw the plane by hand. But after
> I click take off, I feel aileron is not stable, I check the message, the
> desired roll is changing all the time. in this case, I feel afraid to throw
> my air plane, because it can be a crash.  I guess it could because the air
> plane has no speed, so GPS heading is not right, and always changing. so the
> desired roll is not stable. Am I right at point ?
> and then my question is how to make a auto2 hand throw launch with DCM INS ?
> Kevin
> --
> View this message in context:
> Sent from the paparazzi-devel mailing list archive at
> _______________________________________________
> Paparazzi-devel mailing list
> [hidden email]

Paparazzi-devel mailing list
[hidden email]

If you reply to this email, your message will be added to the discussion below:
To unsubscribe from Auto2 take off question, click here.

View this message in context: Re: Auto2 take off question
Sent from the paparazzi-devel mailing list archive at

reply via email to

[Prev in Thread] Current Thread [Next in Thread]