paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Lisa/MX 2.1 Bind Button issues


From: John Voegeli
Subject: Re: [Paparazzi-devel] Lisa/MX 2.1 Bind Button issues
Date: Wed, 27 Aug 2014 20:07:19 +0000

I cannot shine any additional light, but I will say I have had the same issue 
with my 2.1 as well using r100 orange Rx. Hopefully knowing there is at least 2 
will help. Haha.

-JV 

Sent from my iPhone

> On Aug 27, 2014, at 16:02, "cxiao" <address@hidden> wrote:
> 
> Hi all,
> 
> We are using the new Lisa/MX v2.1 boards from 1BitSquared and are having
> issues while trying to bind. On this board, there is a Bind button that
> replaces the previous method of shorting GND to ADC1 on the ANALOG1 port.
> 
> We have followed the instructions on the wiki for  binding the Lisa/M
> <http://wiki.paparazziuav.org/wiki/Lisa/M_v2.0#Binding>   using the bind
> button. We are able to bind just fine with this method; however, the Lisa
> does not stay bound when it is power cycled. We have to rebind every time
> the Lisa is turned off and on.
> 
> We think that this is because the Lisa is always in its bind mode
> (regardless of whether the button is pressed or not) - we actually tried
> binding without pressing the bind button at all, and that works.
> 
> We're using 2 OrangeRX R110x satellite receivers. (we've tried with spektrum
> satellite receivers as well, though).
> 
> Can anyone shed some light on this issue?
> 
> 
> 
> --
> View this message in context: 
> http://lists.paparazziuav.org/Lisa-MX-2-1-Bind-Button-issues-tp16043.html
> Sent from the paparazzi-devel mailing list archive at Nabble.com.
> 
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel



reply via email to

[Prev in Thread] Current Thread [Next in Thread]